• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

SELLING my (2) M1008 CUCVs

K10A

Member
225
5
18
Location
Western Co
I moved to CO and I have 2 trucks here already and I dont want the CUCV to get rusty and I wont be down in So Cal very often to drive it anyway. It has a few very small rust spots.
No major damage , body or mechanical. There is a small dent above the drivers side taillight and the pass door has some bondo that cracked about 6" long . It has 11K original miles and is in really good condition overall. Comes with a spare motor (civvy 150K but runs and extra trans and 2 t cases 1 of them I converted to fixed a yoke.) The inside is green unlike the outside. I removed the top part of the gun racks I dont remember if I chucked them or not , I do have another pair I think. I can get more pics posted but here is the first one I have . It will come with stock wheels and tires. I also have another far sale but it is far less complete status. Both are located in So Cal 2 hours east of San Diego. . In the pic it has a slider but I have since changed it to stock.

$5000 obo






$800 has 3/4 ton axles doesnt run
 

K10A

Member
225
5
18
Location
Western Co
RE: Thinking of selling my CUCV M1008

No one is interested ? Well I guess ebay is next or i sell them to my wheeling buddy who will hack it up and thrash them .
 

SETOYOTA

Well-known member
Steel Soldiers Supporter
2,394
419
83
Location
georgia
RE: Thinking of selling my CUCV M1008

would love to get them......I'm on the east coast though
 

K10A

Member
225
5
18
Location
Western Co
RE: Thinking of selling my CUCV M1008

Make an offer ? ? on one or both ... What is up everyone wants CUCV but something is wrong with mine ? WTH.....
 

Prerunner1982

New member
180
1
0
Location
Edmond, OK
RE: Thinking of selling my CUCV M1008

Would love to have them, just no way to get then 1/2 way across the country... literally half way.. I am in Oklahoma...
 

bigkuh

New member
2
0
0
I am new to the cucv scene and am loooking for axles for a 4wheeling project. Are the Axles on the 3/4 ton the corp 10bolt or the 14 and the 60?
Thanks
 

K10A

Member
225
5
18
Location
Western Co
BKinsey , what parts do you need ? I also have one more that is darn near stripped. lemme know. I could possibly bring one of the trucks up here Trango ,on my way back from CA for Christmas.
 

mangus580

New member
6,010
282
0
Location
Western NY
Capfacsurf, you could probably see them if they were uploaded to the SS server, like I have asked numerous times....

Oh well, not your fault :)
 
Top