• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Slave cable adaptors

frostvair

Banned
13
0
0
Location
ohio
I need some two pin to single pin adaptors. Anyone have a source for me? I have a good set of cables but I need single pin not two pin.:)
 

gimpyrobb

dumpsterlandingfromorbit!
27,786
755
113
Location
Cincy Ohio
Good luck. Those are spoken of but never seen. You have a 2 pin cable, but nato connector on the truck?
 

hndrsonj

Senior Chief/Moderator
Super Moderator
Steel Soldiers Supporter
7,584
363
83
Location
Cheyenne, WY
I think you will have a hard time putting the new NATO ends on a 2 pin cable. They are usually wrapped into one solid cable unlike the 2 zip tied together cables the NATO's usually have. People part deuces with the 2 pin connector all the time. You should get them for under 30$, just convert to 2 pin.;-)
 
219
1
18
Location
new smyrns beach fl
chief cook and bottle washer

if you cant find any adaprers i have loads of new unused ,in the bag, slave cable receptacles, i forgot i had these until i read your post , these are the two pin stile with the screw cap, i was selling these on e bay for 40.00 plus shipping but for members you can have these for 25.00 , or two two for 40.00 .plus shipping . the cables are shorter than the duce ,i have spliced them behind the seat on my duce , hope this helps salvorone 386-409-9291
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks