- 207
- 82
- 28
- Location
- Austin, TX
Looking for a source of quality flange nuts for studs that LMTV wheels together. Need at least 60 but will take a hundred since 20 per wheel.
Any recommendations?
Any recommendations?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Source for 5/8-18 thread wheel stud flange nuts?
- Thread starter LCA078
- Start date
My local bolt store has them. Maintenance supply in Memphis.
Fastenal will probably have them for the cost of your truck.
Or Albany County fasteners is where I buy some stuff for cheap. You will have to call them to price them though
Fastenal will probably have them for the cost of your truck.
Or Albany County fasteners is where I buy some stuff for cheap. You will have to call them to price them though
Attachments
- 207
- 82
- 28
- Location
- Austin, TX
Looks like those are the distorted version where they slightly compress them to make them out of round enough to become self-locking. Are the OEM version on the LMTV/FMTV like this? Not that it matters...just really really curious what the standard issue was.
I'll call them in the morning- thanks
I'll call them in the morning- thanks
They are not.
Military surplus pack of 100 on eBay.
Or these suppliers as well
Military surplus pack of 100 on eBay.
5/8-18 Fine Thread Hex Flange Nut Pack of 100 High Grade Pn12301125 for sale online | eBay
Find many great new & used options and get the best deals for 5/8-18 Fine Thread Hex Flange Nut Pack of 100 High Grade Pn12301125 at the best online prices at eBay! Free shipping for many products!
rover.ebay.com
Or these suppliers as well
Two-Piece Rim Self Locking Nut, M1078 LMTV, 12301125
Locking nut for two piece rims used on M1078 series trucks although the rims may find use in other applications. 20 are required per rim. P/N 12301125. NSN 5310012100199. Made in USA. 0.12 lb
www.eriksmilitarysurplus.com
Areed
New member
- 10
- 2
- 3
- Location
- Charlotte NC
I searched forever and ended up buying them from McMaster. It was the only place I could buy black, coated, grade 8+, top lock flange nuts. They were sold in bags of 20.
Sent from my SM-N975U using Tapatalk
Sent from my SM-N975U using Tapatalk
- 207
- 82
- 28
- Location
- Austin, TX
Dang- I even searched eBay and didn’t see those. Thanks Wes!
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
thought saw said you could order them from Fastenal
ramdough
Well-known member
- 1,554
- 1,729
- 113
- Location
- Austin, Texas
I have heard you can get them from Ryder Trucks. I think Broke Overland bought them there.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Available most surplus suppliers, eBay,
Source for 5/8-18 thread wheel stud flange nuts?
Looking for a source of quality flange nuts for studs that LMTV wheels together. Need at least 60 but will take a hundred since 20 per wheel. Any recommendations?
www.steelsoldiers.com
Areed
New member
- 10
- 2
- 3
- Location
- Charlotte NC
You can for about double or triple the price of Mcmaster
Sent from my SM-N975U using Tapatalk
Sent from my SM-N975U using Tapatalk
johnz
New member
- 16
- 18
- 3
- Location
- Atlanta, Georgia
And before that, he was just known as overland....
CoryDSP
New member
- 3
- 0
- 1
- Location
- Ypsilanti, MI
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
Why do people asking questions on here never give me a part number or the NSN.
Beats me Up. All the numbers, I could be mistaken, are in the TM's but not p0osted to help the "others".
Beats me Up. All the numbers, I could be mistaken, are in the TM's but not p0osted to help the "others".
spankybear
Well-known member
- 884
- 911
- 93
- Location
- WA
McMaster Carr
www.mcmaster.com
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
probably because a helpful soul would themself have to go look it up in the TM's since they don't have it memorized so they figure the party seeking an answer can do that too.
some hints.... search internet for LMTV Lugnuts for example will often show in the list some TM result....... that can lead you to the page of the manual you need to find your info.
spankybear
Well-known member
- 884
- 911
- 93
- Location
- WA
5310-01-210-0199
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
They are 65 bucks for a 100, new surplus. There is many hundreds for sale.
Most times go for the part number and then the NSN, will be quicker to find on auction sites.
Most times go for the part number and then the NSN, will be quicker to find on auction sites.
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
same # as typed by spankybear is in your photo... could one of you verify if that number is for the right or left thread nut?
PS- the napa part number has been on the Part list spread sheet found via sticky at top of this page for a year or so.
Last edited:
- 207
- 82
- 28
- Location
- Austin, TX
Some of you are taking this request waaaaaay too extreme. I specially was asking for a source of commercially available 5/8-18 flange nuts....not necessary the government versions with NSN's. A lot of us ask for similar sources on o-rings, oils, greases, tire valve stems, filters, commercial engine parts, etc...
I posted this in the M939 forum because I have a M923 that I'm singling out. I even tossed it over here too for awareness SO OTHER FOLKS ONLY LOOKING IN THE LMTV/FMTV forum can see it too, but I'm still getting dinged for not being thoughtful. And, no, I don't have all the LMTV TM's on my desk and no, I didn't feel like sifting through all the LMTV/FMTV -23's just to find an NSN or similiar PN that is practically useless to me when I'm actually searching for a very common commercially available part. 99% of the time when I search for an NSN or Gov PN, I get all the websites that just cross reference other NSN or PN's and don't actually provide something I can buy. The 1% of the time I get a match, it's the same surplus resellers who have to cover their holding costs by having rather high prices. Yes, I'm aware of McMaster Carr (we have a commercial account with them), Fastenal, Grainger, etc. and all the other commercial guys (thank you to folks who actually provided these suggestions instead of tossing peanuts from the gallery). I even searched on Finditparts (where I get a lot of parts like most of my lug nuts, valve stems, etc.) but I need a specific vendor pn to find anything there, not a NSN or gov PN. I even searched on SteelSoldiers and only found this link https://www.steelsoldiers.com/threads/fmtv-wheel-studs.191088/ where Swamp Donkey said he had a bunch of them sitting around . I even PM'd Swamp Donkey asking to purchase any spares but he never responded even after I sent another PM a few days later.
So......
Yes, I searched this forum, the internet, PM'd a member, etc. but no, I didn't find what I needed which was an inexpensive, commercially available source for a somewhat large quantity of these nuts.
Yes, I put in the M939 forum and even cross-linked it here, in the Present Day forum, with a descriptive title written for other members in mind using the search option but no, I was not seen as being helpful.
Yes, I put it in the M939 forum because most of the guys singling out their trucks and need these nuts are probably in the M939 (or maybe in the M800) forums but no, my original thread was moved here by the mods here because it's for a LMTV part.
Yes, I sincerely tried to find the info myself, but no, I failed.
I reached out to the forum, not because I was lazy but because I didn’t find what I needed after what I thought was a thorough, but substandard in hindsight, search.
So thank you to the members who actually provided assistance, and especially thanks to Wes who provided a direct link to the source I eventually bought from. (Note in post #6, I even said that I searched ebay but missed these). Looks like I need to start justifying my requests so the peanut gallery doesn't feel the need to chunk legumes from high.
I posted this in the M939 forum because I have a M923 that I'm singling out. I even tossed it over here too for awareness SO OTHER FOLKS ONLY LOOKING IN THE LMTV/FMTV forum can see it too, but I'm still getting dinged for not being thoughtful. And, no, I don't have all the LMTV TM's on my desk and no, I didn't feel like sifting through all the LMTV/FMTV -23's just to find an NSN or similiar PN that is practically useless to me when I'm actually searching for a very common commercially available part. 99% of the time when I search for an NSN or Gov PN, I get all the websites that just cross reference other NSN or PN's and don't actually provide something I can buy. The 1% of the time I get a match, it's the same surplus resellers who have to cover their holding costs by having rather high prices. Yes, I'm aware of McMaster Carr (we have a commercial account with them), Fastenal, Grainger, etc. and all the other commercial guys (thank you to folks who actually provided these suggestions instead of tossing peanuts from the gallery). I even searched on Finditparts (where I get a lot of parts like most of my lug nuts, valve stems, etc.) but I need a specific vendor pn to find anything there, not a NSN or gov PN. I even searched on SteelSoldiers and only found this link https://www.steelsoldiers.com/threads/fmtv-wheel-studs.191088/ where Swamp Donkey said he had a bunch of them sitting around . I even PM'd Swamp Donkey asking to purchase any spares but he never responded even after I sent another PM a few days later.
So......
Yes, I searched this forum, the internet, PM'd a member, etc. but no, I didn't find what I needed which was an inexpensive, commercially available source for a somewhat large quantity of these nuts.
Yes, I put in the M939 forum and even cross-linked it here, in the Present Day forum, with a descriptive title written for other members in mind using the search option but no, I was not seen as being helpful.
Yes, I put it in the M939 forum because most of the guys singling out their trucks and need these nuts are probably in the M939 (or maybe in the M800) forums but no, my original thread was moved here by the mods here because it's for a LMTV part.
Yes, I sincerely tried to find the info myself, but no, I failed.
I reached out to the forum, not because I was lazy but because I didn’t find what I needed after what I thought was a thorough, but substandard in hindsight, search.
So thank you to the members who actually provided assistance, and especially thanks to Wes who provided a direct link to the source I eventually bought from. (Note in post #6, I even said that I searched ebay but missed these). Looks like I need to start justifying my requests so the peanut gallery doesn't feel the need to chunk legumes from high.
Last edited:
- 6,986
- 2,522
- 113
- Location
- Montevideo/Uruguay
No lefties there....!
