goldneagle
Well-known member
- 4,510
- 1,008
- 113
- Location
- Slidell, LA
I upgraded the tires on my M936 wrecker to the 14.00-20 tires and rims. According to my measurements the spare tire is gonna be a tight fit if it fits at all. I measured 13-1/2" opening in the floor between the tool boxes and the tire support wall. I got approx. 14-1/2" for the tire sidewall to sidewall. Tread area is narrower.
I know the A2 rear area is different according to Jeff Davis. Can someone with a M936A1 check the spare mount for me. Possibly with pictures?
I was told I could insert the spare while deflated and then add air. I have a feeling that will cause issues when it's time to remove it or open the tool boxes. The piano hinges are going to rub badly on the spare.
I know the A2 rear area is different according to Jeff Davis. Can someone with a M936A1 check the spare mount for me. Possibly with pictures?
I was told I could insert the spare while deflated and then add air. I have a feeling that will cause issues when it's time to remove it or open the tool boxes. The piano hinges are going to rub badly on the spare.