• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Spicer 6453 to 12 valve?

290smallcam

Active member
150
36
28
Location
peru,indiana
Would this be a ok set up? The 6453 are super cheap out there. Would it need any special parts? Would it bolt right up on a 12 valve with a SAE#2 housing. Has anyone done it?
 

davidb56

Well-known member
1,020
1,237
113
Location
Bonners Ferry Idaho
there must be a reason that nobody seems to have done it. Have you checked the input shaft on both transmissions? maybe one is shorter or the pilot is different. That would be a good place for You to start.
 

davidb56

Well-known member
1,020
1,237
113
Location
Bonners Ferry Idaho
Sorry, I got my transmissions mixed up with another thread. Now I don't have a clue what Im even commenting on.. Iv'e went from sharp as a pin at 55 years old, "to where in the hell am I , and how did I get here", at 65 years old.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks