starting sm465/205 swap in m1009

[wilsonmotors]

Ok so my th400 took a dump on me an I snaged a 465/205 from a 90 model one ton with a diesel. My question is since I am useing a hydro clutch is all the mounting points in my 86 m1009 already marked for my hydro setup or do I need to make a templet from the other truck and place them myself I hope my truck has the places already marked so I can just drill them out

 

[Recovry4x4]

This interests me as I have to come up with a CUCV with PTO capabilities either by hook or by crook.

 

[Skinny]

No need, just buy an M1031

 

[dstang97]

You need to make a template more than likely.
good job on finding a good combo.

 

[colelkhunter]

My tuck has the holes existing but I would make templates if you can. I have that exact swap in my 1009. 465/205 with a hydro clutch. Get the crossmember with the 205. It will make the swap bolt in.

 

[wilsonmotors]

That is the one part im having trouble finding is the 86 -91 cross member as I have the older 84 and down in my truck does anyone have the newer 86 and up W shaped cross member they wanna sell

 

[wilsonmotors]

I need pics of someones hydraulic clutch master mounting on the fire wall can somebody help with this

 

[dstang97]

You kinda need the template if your cab does not have the dimples. Everything needs to be tied in with the master. I may have a template.

 

[wilsonmotors]

That would be really helpful if I could get a copy of the templet as I cant fimd another truck to use for a template and the one I got the stuff from was crushed

 

[wilsonmotors]

That would be really helpful if I could get a copy of the templet as I cant find another truck to use for a template and the one I got the stuff from was crushed