STE/ICE connector

[springer1981]

I'm trying to find the connector that plugs into the STE/ICE plug in the HMMWV. I have searched to no avail. I'm not even sure there is a connector available, has anyone seen one or know what I would look for to find one. Thanks for any help.

 

[Mullaney]

I'm trying to find the connector that plugs into the STE/ICE plug in the HMMWV. I have searched to no avail. I'm not even sure there is a connector available, has anyone seen one or know what I would look for to find one. Thanks for any help.

.
Occasionally there are auction items that would be interesting... The ICE box that you could plug into the terminal in your truck. Hunting down the software might be another adventure though. There are several guys here @ SS with the software and the ICE.

Is/Was that your goal?

 

[springer1981]

No, I just need a connector that I can custom wire. There are signals and wires I can use to hook up stuff. I could run other wires but I think this would be cleaner looking.

 

[Retiredwarhorses]

I have 2 STE/ICE test kits I’m going to sell…these are the early versions, one is quite complete, the other not so.
I havent figured out a price at the moment

 

[Mullaney]

I have 2 STE/ICE test kits I’m going to sell…these are the early versions, one is quite complete, the other not so.
I havent figured out a price at the moment

.
It would be interesting to see what the test kits would actually do - or tell me. Might be that there would be a mad scramble for folks to buy one or both if they knew what it would do. Maybe?

If you figure out what you want for one let me know please?

 

[springer1981]

Based on the cost and difficulty of finding the connector I have gone in a different direction.

 

[papakb]

The STE/ICE kit I had for about 15 years made a great step stool to help reach the top of my toolbox!

The STE/ICE kits were designed for the inept 18 year old coming into the service with little to no experience with automotive systems. Anyone that's turned a wrench for more than a couple of months and knows what a multimeter is and can do doesn't need one. Probably the best part of the whole system is the fact that you have a couple good pressure transducers with their fittings in a handy kit. Everything else can be done with a good set of shop tools (and a multimeter).

 

[tgejesse]

Has anyone come up with some creative usage for the port?

 

[papakb]

Safely measuring alternator output voltage between pins X and V, measuring actual battery voltage between pins Y and V, and emergency start initiate by jumpering pins S and T.

 

[Milcommoguy]

Small cup holder. CAMO

 

[jpelc]

I have 2 STE/ICE test kits I’m going to sell…these are the early versions, one is quite complete, the other not so.
I havent figured out a price at the moment

Do you still have the parial? I'd consider purchasing it for the plug.

 

[Retiredwarhorses]

Do you still have the parial? I'd consider purchasing it for the plug.

I only have the complete kit

 

[Guyfang]

Do you still have the parial? I'd consider purchasing it for the plug.

If that's what you really want to do, then start a "Parts Wanted" thread. Not only will you reach a bigger group of people, but its kinda one of the forum rules.

 

[jpelc]

I only have the complete kit

What are you asking for it?

 

[springer1981]

What are you asking for it?

Are you planning to ignore the moderator post just above yours? LOL

 

[Mogman]

I think this thread has progressed correctly in the spirit of the rules, RWH brought up he had something that might work in the natural progression of the thread.
I think jpelc has appropriately responded to this thread, despite what that old grumpy guy in Germany says

 

[Retiredwarhorses]

Some folks clearly have nothing else to do but mirco management

 

[Mogman]

Some folks clearly have nothing else to do but mirco management

Well, he is correct that jpelc should list his want in the classified as it will get a different exposure, Wanted items do not require membership so they are free to all.

 

[springer1981]

Having been an admin to a very large forum, I know first hand it's a thankless job and you can never make everyone happy. I only threw in my 2 cents because the guy only has 2 posts in 5 years and they are both in this thread. I hope he becomes a more active member and this is just the start of his participation. Just sayin, didn't think he or anyone else was doing anything egregious.

 

[jpelc]

If that's what you really want to do, then start a "Parts Wanted" thread. Not only will you reach a bigger group of people, but its kinda one of the forum rules.

Ahh... ok. new to this. will do.