DigDirt
New member
- 15
- 1
- 1
- Location
- Phoenix, AZ
I have an account with them and it would seem that the price has increased..View attachment 7W0367.pdf
Last edited:
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Survey...... "oil line of death 3116" (governor oil feed line)
- Thread starter coachgeo
- Start date
- 317
- 141
- 43
- Location
- Rutherfordton, NC
Yay me!
- 1,507
- 1,175
- 113
- Location
- TN
Sorry, I meant the fittings. I replaced them, and they did not come with an O ring. The original fitting O rings were questionable.
Last edited:
DigDirt
New member
- 15
- 1
- 1
- Location
- Phoenix, AZ
The CAT code of the 2 o-rings are 4J5477...
Bought together with the tube, but after reading this thread I decide to switch to PTFE flexible hose.
in my opinion (but I am not a expert) the problem in this tube is the diffrent vibration produced from engine and air compressor. Even more if some part came loose. For sure the initial failure is not the tube, otherwise CAT would react, but one leads to another.
Maybe vibration sensors near driveshafts and air compressor can help to find failures before become catastrophics?
Christian
- 1,507
- 1,175
- 113
- Location
- TN
Thanks for the cat codes. I will order and throw the hard pipe in as a spare. God forbid something goes wrong with the flex.
- 1,507
- 1,175
- 113
- Location
- TN
I have a device that which I believe can capture the harmonics that you are talking about. If there is a break in the weather today, I may run some tests.
- 434
- 206
- 43
- Location
- Lynchburg, VA
Watching this thread with interest. Have 6 tires to mount and a transmission to install before I get to this point though...
Oil Line of Death (Replacement) - Trax Off Grid
Steel oil line replacement and couplings
traxoffgrid.com
Third From Texas
Well-known member
- 2,766
- 6,498
- 113
- Location
- Corpus Christi Texas
I was wondering when someone would just sell a kit.Oil Line of Death (Replacement) - Trax Off Grid
Steel oil line replacement and couplings
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
Just replace that POS with SwageLok and it will never fail again or ever.
Most have an opinions..................this is mine
Most have an opinions..................this is mine
Last edited:
- 3,748
- 1,521
- 113
- Location
- North Carolina - FINALLY !
Damn. $70 for $22 worth of parts.Oil Line of Death (Replacement) - Trax Off Grid
Steel oil line replacement and couplings
- 464
- 267
- 63
- Location
- Seville, OH
Military tax!
dmetalmiki
Well-known member
- 5,523
- 2,028
- 113
- Location
- London England
Top quality steel braided Teflon will NOT let you down.
And, I would re route the whole badly designed set up!.
So it 'bounces up and down'!'?
OK, Re - route, and,..let it 'bounce away' to it's hearts content.
jus' my ha' penneth...
And, I would re route the whole badly designed set up!.
So it 'bounces up and down'!'?
OK, Re - route, and,..let it 'bounce away' to it's hearts content.
jus' my ha' penneth...
- 464
- 267
- 63
- Location
- Seville, OH
- 434
- 206
- 43
- Location
- Lynchburg, VA
Who/what/where exactly is this/did it come from?
- 464
- 267
- 63
- Location
- Seville, OH
Fittings from Discount hydraulic hose, teflon brake line from ebay. Total cost a little over $20.
- 3,871
- 497
- 83
- Location
- Gray Court SC
Can you please list the stuff sizes
Thanks
Thanks
- 464
- 267
- 63
- Location
- Seville, OH
The 6" hose length is a little tight, 8" might work better.
There's folks selling kits if you don't want to shop for yourself... The markup is significant.
- 3,871
- 497
- 83
- Location
- Gray Court SC
Thank you