Salty dog
Active member
- 109
- 174
- 43
- Location
- Spring, Texas
Does anybody know the thread pitch for the bracket in the rear of the M1009? I have the jerry can, bracket and strap just need to figure out the thread pitch.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Thread pitch for M1009 Jerry can bracket
- Thread starter Salty dog
- Start date
cucvrus
Well-known member
- 11,291
- 9,688
- 113
- Location
- Jonestown Pennsylvania
5/16" X 18 TPI
Salty dog
Active member
- 109
- 174
- 43
- Location
- Spring, Texas
Just got back from the hardware store and the 5/16 x 18tpi did not fit
cucvrus
Well-known member
- 11,291
- 9,688
- 113
- Location
- Jonestown Pennsylvania
Are they too big or too small?
Salty dog
Active member
- 109
- 174
- 43
- Location
- Spring, Texas
5/16 feels like the right size but wrong TPI, won’t thread in but the bolt appears to be the right diameter
cucvrus
Well-known member
- 11,291
- 9,688
- 113
- Location
- Jonestown Pennsylvania
Thread chaser is needed. I do not recall using an M8 X 1.25 bolt in the body holes. They were always standard bolts I used in them caged nuts.
Salty dog
Active member
- 109
- 174
- 43
- Location
- Spring, Texas
You were right about chasing the threads, didn’t even occur to me. Thanks again for the help