mrfishaholic
New member
- 59
- 0
- 0
- Location
- Olympia, Washington
I would look for a new set of springs, or wait for another auction and start over, these trailers just arent expensive enough to put much work into them IMHO....
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Trailer lean Question.
- Thread starter Ripcord01
- Start date
harleyhouse
Well-known member
- 1,256
- 29
- 48
- Location
- Oakmont, Pennsylvania
Sell it to one of these young kids I see that drive their rice burners from the passenger side.
"I think they call it a gangster lean?" The trailer would look great behind their car!
"I think they call it a gangster lean?" The trailer would look great behind their car!
Ratch
Member
- 586
- 5
- 18
- Location
- Chester County, PA
Did that come out of Havre De Grace?
Ripcord01
New member
- 1,430
- 9
- 0
- Location
- Waldorf ,Maryland
Ratch ,yes it did. I was able to remove the shocks today. Pretty simple to remove. I soaked the bolts down real good with some BPblaster a few times through the morning. Came right off. I jacked up the left side and meaured a difference or sag of 1 and 3/4 .Wow. Removing the springs will not be as fun. Anyone have any hints? I am thinking cutting..
therealsundance
Member
- 412
- 17
- 18
- Location
- Lutherville, MD
A 3/4 impact gun, pb blaster and some heat.
Remember to replace the U bolts.
Remember to replace the U bolts.
therealsundance
Member
- 412
- 17
- 18
- Location
- Lutherville, MD
Are you sure one of the shackles didn't seize up? Could have been left loaded for a long time and rusted up.