U joint straps for rear driveshaft

[PowerstrokeNC]

Anybody know the part number for these?

I have a M998 with 6.5/3 speed and 218 transfer case.

Rear driveshaft has u clamps on front yoke going to TC and then it has straps for the one on the differential.

I am looking for the straps on differential side.

numerous visits to parts stores have proved fruitless even with driveshaft in hand.

the u joint cap is 1 1/16" or 1.06 in diameter.

thanks for the help.

 

[Action]

Take your strap to the store and find the right size in the generic section. Don't ask the guy at the counter. I have different stuff in mine, but the straps were at autozone.

 

[PowerstrokeNC]

My driveshaft and hardware was missing, so don't have the originals

 

[infidel got me]

The hummer parts guy has them. Mods delete if hot acceptable post.

Hope you find them. Need gvw 10.3 or 12.1, he has them either way.

 

[DatGuyC]

I believe any 1330 straps will work for the back diff.

 

[PowerstrokeNC]

Ok, mystery solved. Thought I would post info in case anyone else wants to know in the future.

Auto parts store stuff did not fit, tried NAPA, Advanced and Auto Zone.

the right part comes in a spicer box part number 2-70-18X

when I quoted this part number to some of the auto parts places they said they had it in stock (as a generic) however a physical comparison showed they weren't the same, so be careful of this.

 

[Bowtie70SS]

Did you come up with the part number for the u bolt that fits the front joint of the rear drive shaft

 

[visionoutfitters]

I think the opposite side would use same u joint using the u bolt kit spicer 2-94-28X