• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What did you do to your deuce this week?

tobyS

Well-known member
4,832
833
113
Location
IN
Although slow going, I made some progress on the hub flip friday. Hope to have more done this week. The write up on XM says "easy job with simple hand tools." Ha, bite me. Not a "hard" job, but you need more than simple hand tools.

View attachment 680352

You will be reversing the wheel, dish out then, correct.

Does the flange part of the hub fit inside the lip of the MRAP wheel?
 

Scar59

Active member
Steel Soldiers Supporter
2,811
41
38
Location
Mt. Eden, KY
Had the county Sheriff's Deputy perform the VIN verification on my last Deuce today. An AF 1987 M35A2C2. Last Gov. Liquidation M35 sale out of Warner Robbins. Going w/ Historic Vehicle plates.
 

NDRoughneck

New member
18
0
0
Location
Belfield/ North Dakota
WP_20170517_18_13_25_Pro.jpgWP_20170516_16_35_27_Pro.jpgI just finished flipping my hubs. I've also heard this was a 4 hour job. After installing adapters for MRAP wheels, mounting tires...."murphys tire compound is worth its weight in gold" painting rims, flipped, cleaned, re-packed bearings, new seals, flipped studs. These tires were on my stock rims. So that added alot to the time...So two weekends of putzing around and can't be happier.
 

Tracer

Well-known member
Steel Soldiers Supporter
6,626
14,098
113
Location
Hawthorne, NV.
View attachment 680855View attachment 680857I just finished flipping my hubs. I've also heard this was a 4 hour job. After installing adapters for MRAP wheels, mounting tires...."murphys tire compound is worth its weight in gold" painting rims, flipped, cleaned, re-packed bearings, new seals, flipped studs. These tires were on my stock rims. So that added alot to the time...So two weekends of putzing around and can't be happier.
NDRoughneck. Sure worth the time and effort. Looking Good.:goodjob:
 

rustystud

Well-known member
9,298
3,074
113
Location
Woodinville, Washington
View attachment 680855View attachment 680857I just finished flipping my hubs. I've also heard this was a 4 hour job. After installing adapters for MRAP wheels, mounting tires...."murphys tire compound is worth its weight in gold" painting rims, flipped, cleaned, re-packed bearings, new seals, flipped studs. These tires were on my stock rims. So that added alot to the time...So two weekends of putzing around and can't be happier.
It's a four hour job in a fully equipped shop and being in your 30's or younger ! Otherwise it's a 10 to 14 hour job.
 

goodwithwood35

Active member
Steel Soldiers Supporter
327
51
28
Location
Bakersfield, CA
Got a visit from Mr. 98G and traded my MRAP tires, wheels, and adaptors for a set of pristine G177's on 5 ton rims and a few deuce wheels to complete my set I had. I always felt the 395s were too big for my taste, although they looked cool I missed the original look but wanted the improvement of radials. If you haven't dealt with John I'd highly recommend him, great guy to deal with.

Had some fun this weekend swapping them out...5 more to go!



Sent from my iPhone using Tapatalk
 

tobyS

Well-known member
4,832
833
113
Location
IN
Got a visit from Mr. 98G and traded my MRAP tires, wheels, and adaptors for a set of pristine G177's on 5 ton rims and a few deuce wheels to complete my set I had. I always felt the 395s were too big for my taste, although they looked cool I missed the original look but wanted the improvement of radials. If you haven't dealt with John I'd highly recommend him, great guy to deal with.

Had some fun this weekend swapping them out...5 more to go!



Sent from my iPhone using Tapatalk
I have your fronts. Same rev per mile as the 11.00.
 

Attachments

Tracer

Well-known member
Steel Soldiers Supporter
6,626
14,098
113
Location
Hawthorne, NV.
Got a visit from Mr. 98G and traded my MRAP tires, wheels, and adaptors for a set of pristine G177's on 5 ton rims and a few deuce wheels to complete my set I had. I always felt the 395s were too big for my taste, although they looked cool I missed the original look but wanted the improvement of radials. If you haven't dealt with John I'd highly recommend him, great guy to deal with.

Had some fun this weekend swapping them out...5 more to go!



Sent from my iPhone using Tapatalk
goodwithwood35 you'll like the G177 tires..........good trade.
 

maa45069

Active member
Steel Soldiers Supporter
454
70
28
Location
cincinnati/OH
Got a visit from Mr. 98G and traded my MRAP tires, wheels, and adaptors for a set of pristine G177's on 5 ton rims and a few deuce wheels to complete my set I had. I always felt the 395s were too big for my taste, although they looked cool I missed the original look but wanted the improvement of radials. If you haven't dealt with John I'd highly recommend him, great guy to deal with.

Had some fun this weekend swapping them out...5 more to go!



Sent from my iPhone using Tapatalk
Congrats man looks nice and clean

Sent from my SM-G935T using Tapatalk
 

Elijah95

Certified Rookie
1,239
1,201
113
Location
Georgia
Unfortunately I don't have any pictures or video of it in action, but I managed to get my 5 ton stuck trying to impress the ladies, so I had to bring out the Deuce to play rescue; Needless to say 12k pulling out 22k is one impressive feat! It never skipped a beat



1974 AM General M109A3 w/Deuce Bed, White LDT, Whistler C, and soft top
 

Another Ahab

Well-known member
18,007
4,579
113
Location
Alexandria, VA
Got a visit from Mr. 98G and traded my MRAP tires, wheels, and adaptors for a set of pristine G177's on 5 ton rims and a few deuce wheels to complete my set I had. I always felt the 395s were too big for my taste, although they looked cool I missed the original look but wanted the improvement of radials. If you haven't dealt with John I'd highly recommend him, great guy to deal with.
Your "chain" rig for dealing with the split rims is simple and ingenious, nice!



0314171224c.jpg
 

rustystud

Well-known member
9,298
3,074
113
Location
Woodinville, Washington
Got a visit from Mr. 98G and traded my MRAP tires, wheels, and adaptors for a set of pristine G177's on 5 ton rims and a few deuce wheels to complete my set I had. I always felt the 395s were too big for my taste, although they looked cool I missed the original look but wanted the improvement of radials. If you haven't dealt with John I'd highly recommend him, great guy to deal with.

Had some fun this weekend swapping them out...5 more to go!



Sent from my iPhone using Tapatalk
Those are some beautiful looking tires ! I totally agree with you about the 395's. They make the deuce look like a Tonka truck or in plain words a "Toy" ! But those G177's just look mean !
 

goodwithwood35

Active member
Steel Soldiers Supporter
327
51
28
Location
Bakersfield, CA
Your "chain" rig for dealing with the split rims is simple and ingenious, nice!



View attachment 681357
Thank you...not as nice as a cage, one day I'll weld me up one. But for now the DOT chain will at least prevent the ring from flying through my neighborhood while I stand behind a wall watching my gauge and taking a peek once in a while. I used to do truck tires to pay my rent in college, only had 2 blow on me while in a cage. I don't like taking chances with these!


Sent from my iPhone using Tapatalk
 

goodwithwood35

Active member
Steel Soldiers Supporter
327
51
28
Location
Bakersfield, CA
Those are some beautiful looking tires ! I totally agree with you about the 395's. They make the deuce look like a Tonka truck or in plain words a "Toy" ! But those G177's just look mean !
Totally. Maybe someday on another truck, but trying to keep this one as nostalgic as possible yet still have an improvement over the NDTs. They have their place but it just didn't jive with me. And the steering was horrible at a dead stop!


Sent from my iPhone using Tapatalk
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks