- 1,370
- 960
- 113
- Location
- State College, PA
Looks great Albert!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your 5 ton this week?
- Thread starter dezert ratt
- Start date
- 4,317
- 3,208
- 113
- Location
- Fort Worth, Texas
How did you wire in the eyecon lights? I have that exact setup but the project has been set aside for sometime now and I need to finish it.
- 3,224
- 398
- 83
- Location
- Tonopah, AZ
I had to make some of the cables longer and some shorter. I put the breaker box in the truck's battery box and ran the cables up through the floor. I put the Eyecon control box next to the winch control.
AZDeuce
Active member
- 484
- 38
- 28
- Location
- Tonopah, AZ
That's one sweet M925!
Spyderman
Active member
- 393
- 37
- 28
- Location
- Alexandria KY
I set up my camp for the summer. So I used my 5 ton to move everything down there.
Sent from my SM-N960U1 using Tapatalk
Sent from my SM-N960U1 using Tapatalk
- 7,769
- 19,877
- 113
- Location
- Charlotte NC
I set up my camp for the summer. So I used my 5 ton to move everything down there.
Sent from my SM-N960U1 using Tapatalk
That looks like somebody is gonna have some fun!
- 1,238
- 2,272
- 113
- Location
- Wenatchee, WA
That's quite the spread!
Spyderman
Active member
- 393
- 37
- 28
- Location
- Alexandria KY
Yeah we had a 4th of July party. Lots of Machine Guns, a canon, flame thrower, and explosives. We had a good time!
- 7,769
- 19,877
- 113
- Location
- Charlotte NC
I knew it! I saw the exercise of the Second Amendment happening when I spotted the bowling pins! Yes! That sounds like about as much fun as a person can have with their clothes on.
- 1,238
- 2,272
- 113
- Location
- Wenatchee, WA
There was finally a lull in the breeze long enough to get some stenciling done.
Crf450x
Well-known member
- 275
- 350
- 63
- Location
- Fall Branch, TN
Threw some gauges in mine today.
- 1,238
- 2,272
- 113
- Location
- Wenatchee, WA
I replaced the 2 stickers on the door and also the ignition data plate and the pre-heater data plate.
- 2,069
- 3,025
- 113
- Location
- Florence, SC
Ok, I want to steal your idea!! Where did you get the gauges & gauge pod from?? Look awesome by way too.
Crf450x
Well-known member
- 275
- 350
- 63
- Location
- Fall Branch, TN
Thank you! It was quite the job making it look right. The pod is made by glowshift. I’m hoping the individual pods won’t bounce around too much.
The gauges are isspro ev2. The 30 psi fuel pressure gauge is hooked to a 400psi sensor and now 10=100, 20=200 etc. Had to reprogram the gauge to read correctly.
Also, the gauges/lights can use 24v with no modifications.
Last edited:
flashbucks
Member
- 47
- 70
- 18
- Location
- Albuquerque, NM
Just an FYI, HF has a magnetic "paint can" holder that attaches to any flat steel surface and holds two beverages plus a few pens if needed. Paint to match your truck and you are set. https://www.harborfreight.com/magne...k-64643.html?_br_psugg_q=magnetic+tool+holder
Crf450x
Well-known member
- 275
- 350
- 63
- Location
- Fall Branch, TN
Got my intake finished up today. Getting closer to driving it every day.
Hopefully you did the air filter cage setup and the 46664 filter otherwise you will be starving the engine
Crf450x
Well-known member
- 275
- 350
- 63
- Location
- Fall Branch, TN
Nah I decided the small gain wasn’t worth the trouble. This winter I’m gonna look into a totally different air box. Maybe use the space where the trans cooler used to be? Not sure yet. Right now I’m just tired of working on it every day
I had an air box setup that set on the inner fender liner. Was a whole filter housing and everything complete out of the box wix 46891. Filter is bi directional. I hooked from the filter to the turbo using a 7in to 5.5 in hose i got from big rig chrome shop
Cut an intake in the hood much like the deuce heater scoop. Use plumbers metal banding to secure it to the metal brackets in the inner fender liner
Crf450x
Well-known member
- 275
- 350
- 63
- Location
- Fall Branch, TN
I came across that in an old post trying to see what other people had done. May wind up with something like that. I plan to rig up a vacuum gauge of some sort to see how much of a difference I can make.