• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What have you done to your FMTV or LMTV today

R

Ronmar

Well-known member
3,881
7,549
113
Location
Port angeles wa
Ok, the larger sender pointing up is the gauge sensor, the smaller sensor lower, aft inboard on the same oil manifold, looks like the 15 psi oil sw that controls the oil light, alt energize and starter lockout…

what year is your truck?
 
MatthewWBailey

MatthewWBailey

Thanks for this site. My truck runs great now!
Steel Soldiers Supporter
863
1,567
93
Location
Mesa Colorado
Ronmar said:
Ok, the larger sender pointing up is the gauge sensor, the smaller sensor lower, aft inboard on the same oil manifold, looks like the 15 psi oil sw that controls the oil light, alt energize and starter lockout…

what year is your truck?
Click to expand...
Truck year is '04. Engine plate is '99

So that psi switch is set to 15? That's good then since it's not dropping out at idle.

I would assume pressure switches are more robust than pressure transducers.

I see now on the schematic line 37 that wire 34a feeds the idiot light.
 
Last edited:
R

Ronmar

Well-known member
3,881
7,549
113
Location
Port angeles wa
MatthewWBailey said:
Truck year is '04. Engine plate is '99

So that psi switch is set to 15? That's good then since it's not dropping out at idle.

I would assume pressure switches are more robust than pressure transducers.

I see now on the schematic line 37 that wire 34a feeds the idiot light.
Click to expand...
yea if your oil light isn't coming on and the alt isn't dropping of line that sw is not closing. How close it is to a 15PSI activation point and its amount of hysteresis is another story, you would have t take it off and connect it to a regulator and yet another gauge to map its response. could also check that mechanical gauge response...
 
MatthewWBailey

MatthewWBailey

Thanks for this site. My truck runs great now!
Steel Soldiers Supporter
863
1,567
93
Location
Mesa Colorado
Ronmar said:
yea if your oil light isn't coming on and the alt isn't dropping of line that sw is not closing. How close it is to a 15PSI activation point and its amount of hysteresis is another story, you would have t take it off and connect it to a regulator and yet another gauge to map its response. could also check that mechanical gauge response...
Click to expand...
My alt is the delco pad mount so it doesn't have the "energize" wire. I think it's 1200rpm auto on
 
You must log in or register to reply here.
111,192members
165,488threads
2,328,800posts
1,034online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks