What have you done to your HMMWV today/lately

[ufoDziner]

Is the alternator some cheap china crap or is it a name brand? Also is it duel voltage>>

Single voltage. Looks like it's good quality. There is no branding and he says that they're made for him.

What are you going to do about the imbalance caused by the transmission TCM?
TCMs do not like having switched 12V going to the unswitched input in case you are thinking of using a switched power converter.
Actually I think it is funny they call that an upgrade kit..

I'm installing a Cooper 21100E00 (manual attached).

 

[Gcelevator]

Figured out the AC, just a wire connection i guess. I have to fix the drain fitting piece under the system.

 

[Bulldogger]

A customer's HMMWV, but he's not on this site so I am sharing with permission. He's mounted my new black sailcloth cargo cover on his ride. He also has one of my soft slant backs, but wanted a cargo cover so he could have options.
Bulldogger

 

[Gcelevator]

1151 getting in shape. Nose installed, head light LED truck light works as intended, windshields installed (have to paint the retainers, was thinki g abouth making them out of 1/4" aluninum and more coverage towards the rubber gasket or a complete retainer similar to Ibis Tek instead of the half retainer. Added some freon to the AC system but i have a leak through the low side port, it is corroded and have to replace the valve core.

 

[Gcelevator]

Sent this M1114 to a new home, i have no time to work on it and a friend got it at my cost, time for someone else with this M1114 to report to this thread

 

[Al Capone]

Started an upper console for various switches and electronics.

I built a similar overhead console . Made brackets to wrap around bow and clamp . I also wrapped it in green canvas . Mounted a radio up there in a boat enclosed case

Also put a Those military Guys keyed switch in. It works great but the instructions were wrong and they didn't include the unit bit that says is included.

 

[M1165A1]

My air compressor hose and control wire wandered out of a zip tie and made contact with the exhaust pipe under the doghouse. That led to the air hose, the control wire, and the high temp loom wrap all melting into a mess.

Anyway cut out the damaged section and replaced it yesterday with a slightly better routing. Also added a thermal wrap for the heck of it.





I also added a Morrflate 4 tire inflator hose (link here) and now I air up/down at the trailhead in record time.

 

[155mm]

had time to remove the passenger rear seat base under the maintenance body and found there is room for not 4 but 6 group31 batteries, woo hoo, always need more power

Intend on removing battery box and installing air ride seat for driver and passenger