What have you done WITH your wrecker this week?

[Ajax MD]

Good Lawd, some real museum pieces in there.

 

[Coffey1]

Replaced batteries
Replace alternator
Installed led headlights
Installed backup alarm
Went through all fuses and relays
Got crane working
Changed leaking tire
Bought amber beacons and getting ready to install

 

[rickpolak1]

Hey guys I apologize for posting off topic, but you all seemed like you might be able to answer my question. I just purchased a M936A1 and I cant for the life of me figure out how to operate the front recovery winch. Any help from you wrecker owners would be much appreciated.
Thanks!
Rick

 

[Turbo Detroit]

M543a2c

Well during the snow i used my wrecker to remove a fallen tree and to pull out a stuck bucket truck that slid into a bad ditch as most of brevard and surrounding area's lost power. XZL's Did amazing in the powder and I had a blast driving were no snow plows had gone even had to remove a few tree's.

 

[fuzzytoaster]

Picked up another M936A2 for reasons. It came with a fording kit installed and I'm still cleaning her up. A few bad hoses here and wasps there but a solid truck.

 

[5tonpuller]

The most use full thing it did this week is help keep the dust off the floor under it.
LOL

 

[AZORRAT]

Picked up another M936A2 for reasons. It came with a fording kit installed and I'm still cleaning her up. A few bad hoses here and wasps there but a solid truck.

Nice light bar lol



Sent from my iPad using Tapatalk

 

[AZORRAT]

Neighbor: do you have a couple moving dollies to move my spa?

Me: yes, be right over





Sent from my iPad using Tapatalk

 

[Ajax MD]

Neighbor: do you have a couple moving dollies to move my spa?

Me: yes, be right over

View attachment 752587



Sent from my iPad using Tapatalk

LOL...what did your neighbor say when you showed up with the "dolly?"

 

[fuzzytoaster]

Gave #2 a steam bath. It really had no choice as greaser and cold power washing was not cutting cutting through the grime. It really made the difference.

 

[Floridianson]

Loaded up an old 818 with no front axle. Getting my yard cleaned up slow but sure.

 

[AZORRAT]

Sometime I just pick things up because I can. My better half calls it playing, I call it training.

Sent from my iPhone using Tapatalk

 

[Scar59]

That's not playing, that's working.... love the bullet holes in the wind shield. Hopefully that was target practice and not demand for payment.

 

[M35A2-AZ]

I took my Wrecker to our club's yearly show this past weekend, great weather.

 

[BajaRat]

Love it !
Thanks, Lionel

 

[Coffey1]

Used mine to pull trees

 

[sandcobra164]

Pulled out an LHS M1120A4 that got stuck during "Drivers Training". For some reason the pictures uploaded in reverse order.

 

[swiss]

Pulled out an LHS M1120A4 that got stuck during "Drivers Training". For some reason the pictures uploaded in reverse order.

Would you say that the driver failed drivers training? Looks to me like he steered straight towards a big mud pit

 

[Gman021]

View attachment 752971

Gave #2 a steam bath. It really had no choice as greaser and cold power washing was not cutting cutting through the grime. It really made the difference.

How do you like that crash truck? Was close to grabbing one last year, but information on those Teledyne's is sparse.

 

[sandcobra164]

Mr. Steve,
I'm ashamed to say that the driver that stuck the LHS is assigned to drive a "SECM" or Contact Maintenance HMMWV for the Recovery Section. He informed the "Trainer" that he thought the hole looked deep but the trainer said "It's locked into 8X8, punch it"! Now you know why you sometimes get a new MV from auction and wonder "how did they get mud up into that crevice"? I'm completely against abuse of MV's but sometimes it happens.

Joseph