greatyili
New member
- 2
- 0
- 0
- Location
- Columbia, SC
Got a M1083. Great truck. Everything seems working, but notified missing three diodes on circuit breaker board, not sure what it will do, and where to get it? Any hint will be appreciated.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What the diodes on circuit breaker panel for?
- Thread starter greatyili
- Start date
- 1,200
- 457
- 83
- Location
- Spartanburg,SC
Pictures? I'm not sure what you're talking about.
Jakelc15
Active member
- 718
- 37
- 28
- Location
- Hanover Pa
They are used on the brake/turn signal circuit for the 7 pin trailer plug.
Not sure if that's were your talking about
Not sure if that's were your talking about
View attachment Pages from m1078_TM 9-2320-365-20-1.pdfI'm guessing it's the 3 on the left side of the power distribution panel. I know the top one is part of the starting circuit but I'm not sure about the other two. I attached the PDF page from (m1078_TM 9-2320-365-20-1) page 1653.
greatyili
New member
- 2
- 0
- 0
- Location
- Columbia, SC
Yes, it is the three diodes on the upper left side of the pannel, which were missing in my M1083 truck. Not sure what they are for, it seems my truck starts, and runs well without them. I checked the part number is 1248342, Not sure where I can get these diodes, and concerned if I don't have them, there might some problems for the engine or other electrical issues.
Thank you all for the reply.
Thank you all for the reply.
scottmandu
Active member
- 822
- 36
- 28
- Location
- Texas
Those look like relays, which may contain diodes.
- 1,813
- 1,519
- 113
- Location
- Orlando, FL
The devices in those spots in my truck read "Dill Blox - Diode Module - 100690".
If it helps figuring out what they are, a "diode" is an electrical device that passes electricity in only one direction, like a check valve in a hose.
http://www.dillblox.com/diode.htm