10isBestmm
Member
- 52
- 47
- 18
- Location
- San Antonio, Texas
Only two trailers I'm seeing that might be compatible is the 5 ton M1095 and the 2.5 ton M1082.
Anyone tell me how it runs pulling those?
Anyone tell me how it runs pulling those?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What trailers are appropriate for the 7 Ton?
- Thread starter 10isBestmm
- Start date
- 1,117
- 1,054
- 113
- Location
- Perry, FL
I have a Globe GTTU202-30-20 T/A Equipment Trailer.
Last edited by a moderator:
The 1082s and 95s do not weigh anything. It takes a heavy trailer to drag a 400hp truck down. The usmc does not use either trailer so we have so military photos or feedback. They are pretty useless trailers without having a forklift.
The globe and load king trailers are equipped with 385 or 425 super singles to make them light to pull.
The MK105 and mk593 are the basic cargo trailer pulled behind the MTVR. The mk149 WB is also used.
Mk31 variants pull versions of the m872s, m970s, m870a1,a2,as and other lowboy types
They will pull the mk17 flatbed rbu units just fine as well
M989A1s and M989 flatbed trailers can easily be pulled
- 285
- 240
- 43
- Location
- Herriman UTAH
Oshkosh made trailers specific for the 7 Ton. I have never seen any for sale.
MK105: cargo trailer, tandem axle max payload 8,000 pounds.
MK149: water trailer, tandem axle water tank can hold 600 gallons.
MK353: Generator trailer, tandem axle, 30 kw and 60 kw generators.
Jon
- 1,117
- 1,054
- 113
- Location
- Perry, FL
Sorry about the rule violation. My apologies.
10isBestmm
Member
- 52
- 47
- 18
- Location
- San Antonio, Texas
Is there a good reason not to try with a M1102?
Also, how do the flatbeds perform in semi rough terrain? Not planning on mudding with it, just curious.
Also, how do the flatbeds perform in semi rough terrain? Not planning on mudding with it, just curious.
M1102 is made for a hmmwv. You can't see it behind the truck
The Globe trailers are designed for offroad use. As demonstrated in Afghanistan to recover damaged vehicles and equipment that has been immobilized
- 285
- 240
- 43
- Location
- Herriman UTAH
I seen many Marine photos of the 7 Ton pulling a M105A2. I have both so I will get a photo of them together and post it.
- 285
- 240
- 43
- Location
- Herriman UTAH
Here is a video from the Marines showing the 7 Ton pulling the new water trailers, MK149.
https://www.dvidshub.net/video/706863/hurricane-dorian-preparation-goettge-memorial-field-house
https://www.dvidshub.net/video/706863/hurricane-dorian-preparation-goettge-memorial-field-house
Aka. Water buffalos
The issue with pintle towed trailers is to get the load balanced so (front heavy) you don't overload the drawbar or bring the front wheels off the ground or (rear heavy) lift the back of the towing vehicle off the ground either of which could result in overloaded tires and axles. trucks 2.5t and bigger have swiveling pintle hooks to allow the truck and the trailer to oscillate in different directions at the same time without damaging the drawbar on the truck or the trailer. A grease fitting is supplied on the truck to keep everything moving freely. Neglect it at your own peril.
Attachments
- 285
- 240
- 43
- Location
- Herriman UTAH
I have photos AND A VIDEO!
The issue I found is that the M105A2 is not able to get the pintle ring high enough to just drop on the hook of the 7 Ton. It took three of us to lift the trailer and drop it on the hitch. When I took the trailer off the 7 Ton, I stuck some wood under the trailer jack wheel so that it would be high enough next time.
The issue I found is that the M105A2 is not able to get the pintle ring high enough to just drop on the hook of the 7 Ton. It took three of us to lift the trailer and drop it on the hitch. When I took the trailer off the 7 Ton, I stuck some wood under the trailer jack wheel so that it would be high enough next time.
10isBestmm
Member
- 52
- 47
- 18
- Location
- San Antonio, Texas
Would the higher mounting of the pintle affect the load capacity on the trailer?
I know the mtvr wont care and will pull it even if its missing a wheel.
I know the mtvr wont care and will pull it even if its missing a wheel.
- 285
- 240
- 43
- Location
- Herriman UTAH
10isBestmm
Member
- 52
- 47
- 18
- Location
- San Antonio, Texas
Tried towing a m1061 a few months ago and the pintle height is a problem.
Bought a m1073 and find its a pretty good fit, like the m1061 but with larger tires and the pintle mates up much better.
Bought a m1073 and find its a pretty good fit, like the m1061 but with larger tires and the pintle mates up much better.
I went to the classifieds to look for a link to a Globe trailer that I saw a while ago that would be appropriate for the MTVR. The OP of that thread is you, lol. That is a bad ass trailer. I want that trailer along with an MTVR to build a custom habitat on. The trailer looks tough, like it would take a lickin' and keep on ticken' no matter what anybody does to it.