- 1,511
- 1,178
- 113
- Location
- TN
Seems a bit underpowered.......... heh heh heh : )
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What would a LMTV completed run? Pic enclosed Also where do you find the hood racks
- Thread starter DukeNukem
- Start date
- 1,511
- 1,178
- 113
- Location
- TN
Personally, I would drop a Detroit 12 liter in. Cheap parts. Tons of parts. Can in frame rebuild. Sits higher, so plasma the floor.
And you will need to move everything back about a foot too. Another 310 cubic inches is alot of space.
Little motors like the 3116. 3126 or C7 would be better suited for a replacement along the lines of a DT466 if you wanted the simplicity and cheapness along with reliability. They are a dime a dozen. Buy a school bus for $2200. Pull the engine. Trans, fuel tank and other useable things and scrap it and get a good deal of your money back.
The 466 can make gobs of power for a mild dent in your wallet.
- 1,511
- 1,178
- 113
- Location
- TN
Well, yes it is used, but lets look at like this. This is for a business. THESE ARE NOT MADE FOR THE DIY PERSON. It has been thoroughly gone through and in some cases upgraded. Of course it is marked up. A typical big company would not flinch at the price if it can get their guy to the top of a mountain to fix a cell phone tower. Did I mention that the company needs the truck NOW?
- 1,511
- 1,178
- 113
- Location
- TN
I looked it up one time. I think there was maybe 4 " more in length?
- 4,318
- 3,208
- 113
- Location
- Fort Worth, Texas
I was thinking about following your build but using the spare 1079 box have. The question would be what to do with all the space between the cab and box? So many possibilities.
![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]"){kind=icon}
Try 16 inch difference. A 60 series is around 57in long and the little cat is 41in long
Mount it on a bolster trailer and drag it around it's easier.I was thinking about following your build but using the spare 1079 box have. The question would be what to do with all the space between the cab and box? So many possibilities.
Attachments
- 1,511
- 1,178
- 113
- Location
- TN
I stand corrected. I was looking at the Marine 3116 and the dimension includes a longer housing.
- 1,511
- 1,178
- 113
- Location
- TN
What kind of power are we talking about?
With free mods. 300hp 850ft lbs. Even more with a 93 to 95 on those year engines. The p pump can be calibrated higher. Speed is money how fast can you afford to go. Remember something has to harness the power. The allison can only take so much
Adventure Driven
Member
- 321
- 14
- 18
- Location
- Montana
Not true, we have not updated the u tubes in awhile, we do have a toilet, a shower and our bed is on electric linear actuators, we don't give 2 cruds about sat TV, so that will never go in our truck. We have a form of cruise control, not shown in photos of video. But you are correct, we have 6 Battle Born batteries powering our camper, things like hydronic heater, AC, fresh water pump, under sink insta hot water heater, seperate air heater, engine block heater, mood lights, 3 power Dometic awnings, Dometic induction cook stove and so forth.
Seth
Seth
Adventure Driven
Member
- 321
- 14
- 18
- Location
- Montana
The cab roof rack and side step ladders, light bar etc shown in the photo will cost you right at $7500.00 installed from Stanley Fabrication in Santa Cruz CA, he has a waiting list and is booked 4 months out for fab work,
Seth
Seth
Adventure Driven
Member
- 321
- 14
- 18
- Location
- Montana
Thank you, Optimus is looking killer also, we are contemplating having a LMTV meet here in Flagstaff AZ as there are places to camp for large groups of people out in the woods, we have hundreds of miles of Brutus trails to pick from planned out, we could leed group runs and such. We will see how this progress's
Seth
Seth
wandering neurons
Active member
- 249
- 113
- 43
- Location
- Fallon, NV
OK, LMTV meet in Flagstaff? That'd be a long drive from Colorado Springs, but would be worth it! Keep the group informed on that please!
pontiac62
Member
- 180
- 4
- 18
- Location
- battle creek, mi
Time, date, an place. Us easterners welcome lol.
Chances are I won’t be there until get my truck on the road an outta the yard art duty. Slowly getting a few parts.
Sent from my iPhone using Tapatalk
Man of few words
M1081 LVAD
Adventure Driven
Member
- 321
- 14
- 18
- Location
- Montana
I just called Acela and their trucks start at $100,000 and go up from that depending on what your needs are. We have personal experience with Acela (and made a video about it)
If we had it to do over we would not think twice about buying one as we have way more than $100,000.00 invested in Brutus already and spent way to much time getting all the projects done.
This is just our opinion and is not for everyone and that's certainly ok, the bottom line is we all have very cool trucks no matter the condition or build and we enjoy them
Cheers
Seth
If we had it to do over we would not think twice about buying one as we have way more than $100,000.00 invested in Brutus already and spent way to much time getting all the projects done.
This is just our opinion and is not for everyone and that's certainly ok, the bottom line is we all have very cool trucks no matter the condition or build and we enjoy them
Cheers
Seth
Third From Texas
Well-known member
- 2,777
- 6,529
- 113
- Location
- Corpus Christi Texas
I'd certainly fab local, but that does beg to question:
If there is a demand for it, certainly a knock-down kit could be made, sold, and shipped anywhere in the upper 48 for well below half of that (then welded up locally).
After all, it's really just a brush guard and does not necessarily need to be produced in DOM nor even chromolly for the price conscious.
We used to do this all the time with sandrails and rollcages.
Last edited: