Hooper
New member
- 294
- 0
- 0
- Location
- Grand Rapids
I have a 105 but would like some two or three times this size. Do anyone know if they exist and if so the model number?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Whats the biggest cover/inclosed pintel trailer?
- Thread starter Hooper
- Start date
wreckerman893
Possum Connoisseur
- 15,629
- 2,054
- 113
- Location
- Akenback acres near Gadsden, AL
You could get a bolster trailer, mount a deuce bed in it and then either put bows and a cargo cover on it or put a shelter in it.
- 8,280
- 655
- 113
- Location
- Corpus Christi, TX
Yep because there really isn't anything else. You could say one of the M989 ammo trailers but I've never seen a canvas cover for one (not saying there isn't one, I've never seen one) but that trailer shouldn't be towed by a deuce. You could go with a M1061 but it doesn't have sides--it's a flat bed. There is a system for it that covers it but it's extremely heavy, rare, and tough to deal with. It would also take you from 8 pallet capacity to 6--might as well fab up a trailer using a deuce bed. I've seen some really nice quality jobs by folks out there using deuce beds by using a bolster or just cutting a worn out deuce in half and welding up the hitch area.
- 5,580
- 349
- 83
- Location
- DESOTO, KANSAS
Not 2 or 3 times as big but there is the M1082 and M1095, a guy can dream can't he?
Attachments
Last edited:
Adrian A
New member
- 261
- 7
- 0
- Location
- Fresno Ca.
Holy moly!
- 12,195
- 325
- 0
- Location
- gainesville, ga.
What about the 5t trailer that is used as the base for the laundry trailer, this has bows and a cover.
quickfarms
Well-known member
- 3,495
- 25
- 48
- Location
- Orange Junction, CA
A M146 on a dolly!
- 7,058
- 147
- 63
- Location
- Mid Hudson Valley NY
the M1082 and M1095 trailers are a PITA to load without a forklift, and the base of the laundry trailer is the M1061 trailer.
Carlo
New member
- 1,364
- 20
- 0
- Location
- palazzago italia
I have a 3 axle with soft cover but no hard top. This pulls like a dream very stable with the back fixed axles-
- 5,369
- 3,380
- 113
- Location
- Lexington, South Carolina
The problem with bigger trailers is that the deuce is rated to pull a maximum of 10,000 pounds. A fully loaded 105 is 5,000 pounds (actually an MKT is 5700 fully loaded), so once you go over twice the rated load/size of a 105, insurance is not gonna cover you 'if' an accident happens. Read the fine print, if you exceed the 'as manufactured' capacity, the insurance company can put all the blame on you, and will. How deep are your pockets? Enough to pay 10 million or more in a damages suit? And you don't even have to be 'at fault' in a purely technical view with who did what. Once you exceed the as manufactured specifications (GVWR, GVTR), you are on your own, period.
Carlo
New member
- 1,364
- 20
- 0
- Location
- palazzago italia
It hurts to hear this but it needs to be said. Someone needs to remind us there are limits to what we do. Thanks
Carlo
New member
- 1,364
- 20
- 0
- Location
- palazzago italia
I also pull a single axle with my M35A2. I use the 3 axle on the M931A1 and the M923A2.
Hooper
New member
- 294
- 0
- 0
- Location
- Grand Rapids
That's a good idea, I think I will look for an expansible body.
Hooper
New member
- 294
- 0
- 0
- Location
- Grand Rapids
Thats perfect, what do they cost? ish
Hooper
New member
- 294
- 0
- 0
- Location
- Grand Rapids
What about a 923, I just sold my A3 for the 923A1
Carlo
New member
- 1,364
- 20
- 0
- Location
- palazzago italia
Ex German Army Reserve (new unused) €1.100