It seems I can find all the floor insulation parts except the driver side floor. Passenger sides seem plentiful, but the driver side is out of stock everywhere. I found a supplier that will order for me direct from the manufacturer, but I have to order 8! I guess I could sell the other 7 on ebay since there seems to be no other supply, but my luck as soon as I get them someone will flood the market with them at a lower price.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Where can I find Floor Insulation?
- Thread starter Sintorion
- Start date
Augdog1964
Member
- 522
- 15
- 18
- Location
- Richmond, IN
Where can we find BLACK insulation too?
jake-cutter
Member
- 297
- 13
- 18
- Location
- League City, Texas
Same here. I have been looking for a complete black set or at the very minimum tan.
DanM7890
Active member
- 1,134
- 11
- 38
- Location
- Houston, TX
I have a new tan passenger side floor. I also have no idea where all this black insulation is coming from.
The supplier I talked to said that they can get it in green, black, white, or tan. I might see if I can get a variety of colors. They were talking around $80 each for green with buying 8. The wanted almost $200 if I just bought 1!!. Compared to what I have seen the passenger sides selling for, $80 seems about right.
Now my search gets more complicated. It looks like there are at least two mats that look the same, but have different part numbers. http://equipmentpartssales.mysimplestore.com/products/m998-front-floor-lh-insulation-12446700-nos and http://equipmentpartssales.mysimple...8-vehicular-cab-insulation-panel-12339907-nos I am guessing there is some difference, but I can't see it.
- 4,401
- 4,184
- 113
- Location
- Brentwood, Calif
There are numerous part numbers for all the insulation, mostly due to the seating changes. I jut bought several thousand in various stock for the shop, the left fronts are pretty much gone.
I can get 10ft rolls of the OEM pad in green, black or Tan, then I cut them to fit, it makes an awesome deck pad as they are the same material. That 10ft roll is heavy as S**t, so shipping is a killer.
Guantanamo George
Member
- 41
- 1
- 8
- Location
- Perth West Australia
This company sells the correct material in green, tan and black in various thicknesses for those who want to do their own.
http://www.cabinsulation.com/floormats.html
http://www.cabinsulation.com/floormats.html
ohiohmmwv
Member
- 450
- 16
- 18
- Location
- Columbiana, Ohio
anyone know the proper part numbers(or if they even exist) for rear black floor insulation. I'm looking for the set that's designed for the late style seat bases.
3jacks
Active member
- 153
- 39
- 28
- Location
- Near Jackson, MO
They will mail you some free samples. I have no affiliation with the company. Comes in rolls I think.
Attachments
ohiohmmwv
Member
- 450
- 16
- 18
- Location
- Columbiana, Ohio
I've checked that out and seen it mentioned on the forum but from what I've seen listed on their website it's only 3/8" thick. I have the front oem floor insulation in black and it's almost twice that thick.
3jacks
Active member
- 153
- 39
- 28
- Location
- Near Jackson, MO
I measured the samples I have and (2) of them are 3/8" and the center one is 9/16". Definitely not OEM density or thickness.
ohiohmmwv
Member
- 450
- 16
- 18
- Location
- Columbiana, Ohio
Are you saying the black lava one is 9/16" thick?
3jacks
Active member
- 153
- 39
- 28
- Location
- Near Jackson, MO
Green and diamond plate are 3/8. Black lava is 9/16"
Attachments
ohiohmmwv
Member
- 450
- 16
- 18
- Location
- Columbiana, Ohio
Ok, I just measured my oem insulation. The foam is very close to 9/16" thick then add thickness of rubber.