Where to get 12V on m1078

[chief76433]

We are starting to rig out our new m1078 for a brush truck and I need to now the best way to get 12V. I want to run power to a master switch and then to a new fuse box that will power a radio,siren,intercom and some LED flashers. What is the best way to get power from the fuse panel in the cab? Or should I run a wire from the batteries? Thanks.

 

[Suprman]

Under the panel at the corresponding bolt you can see on the left of the panel. Come off with a fused link there is no protection to the panel.

 

[kenet3621]

Some information in this post....

http://www.steelsoldiers.com/showthread.php?149413-LMTV-fuse-panel-pics

 

[chief76433]

​Many thanks. That is what I needed to know.

 

[kenet3621]

Here are a photo of the relay panel on the passenger side.




Photo of the relay panel diagram (this helped me a lot).


I use both the 24V and 12V power on the left side of the panel. 24V for a GOLIGHT and the 12V for a dash box for GPS, cellphone charger, backup camera and other stuff.

I agree with Suprman be sure to fuse any connections!