• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Where to get the silicone hoses for coolant?

ramdough

Well-known member
My coolant line from the tank to engine is too short to fit my AC compressor into place. It would rub on the serpentine belt if I moved it.

The TM calls it:

Rubber silicone class Q 1” 400lb rated.

I found 50psi rated silicone hose.

Any thoughts?

Also, probably should swap the Home Depot fittings out at the elbow.


Sent from my iPhone using Tapatalk
 

87cr250r

Well-known member
McMaster-Carr sells it.



The top selection has a braided or spiral wire reinforced option. The braided hose cannot be bent.

The bottom selection (vacuum rated) is what you'll see at most truck shops and is very flexible.

My local Caterpillar and marine hardware stores stock quite a bit of it as well.
 
Last edited:

ramdough

Well-known member
Well, Private Snuffy put in some Home Depot fittings.

Any thought on where to get the proper elbow? Most I have found are not metal sweep elbows like what I have seen on other trucks.

IMG_7215.jpeg
 
Top