levi schneider
New member
- 4
- 9
- 0
- Location
- Hobbs nm
I found a GMC M135 I think that has a winch I was wondering if the winch on it will transfer over to my M35. Any advice would be helpfull
Thanks
Levi
Thanks
Levi
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Will a M135 winch work on a M35
- Thread starter levi schneider
- Start date
citizensoldier
Active member
- 3,981
- 17
- 38
- Location
- Northern Michigan. Smelt City
The winch body is the same. You will need a M35 PTO and shaft.
levi schneider
New member
- 4
- 9
- 0
- Location
- Hobbs nm
Ok I will talk to the guy and see if i can get it for a decent price. Then just keep my eyes open for the pto and shaft. Thanks for the fast reply.
Semper Fi
Semper Fi
- 5,580
- 349
- 83
- Location
- DESOTO, KANSAS
If you get a deal I could use the 135 pto and shaft if it has a decent price. Thanks in advance.
cbvet
Active member
- 1,567
- 20
- 38
- Location
- Northwest (Knox) Indiana
FWIW-
I asked the same question a long time ago.
Someone said the PTO shaft attached on the passenger side on the M135/211. Opposite from the M35.
I never checked to see whether this was correct.
I asked the same question a long time ago.
Someone said the PTO shaft attached on the passenger side on the M135/211. Opposite from the M35.
I never checked to see whether this was correct.
Derrickl112
Well-known member
- 2,654
- 84
- 63
- Location
- Southeast MI
More pics of your chevy pulling the deuce! How well did it do? I'm assuming it's a 2500 with the duramax? How well did it stop with that much weight?
levi schneider
New member
- 4
- 9
- 0
- Location
- Hobbs nm
Well I didnt run up on any stop signs I didnt have any trailer brakes also. Just took my time and made sure I had plenty of distance between me and other vehicles in front of me. I brought it back from south of abq nm It pulled 51mph through the pass east bound on I 40 but once I got through that she ran 70 to whole way home. Yes it is a 2500. Got about 8 mpg with it also.
I will talk to to salvage guy and see if he will part with it and I will let you know MWMULES. Thanks for that info guys I make sure I get under there and look at the differnces.
I will talk to to salvage guy and see if he will part with it and I will let you know MWMULES. Thanks for that info guys I make sure I get under there and look at the differnces.
spicergear
New member
- 2,307
- 28
- 0
- Location
- Millerstown, PA
The winch is the same, all else; mounts, brackets, PTO, driveline, etc will not swap over.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
True.
citizensoldier
Active member
- 3,981
- 17
- 38
- Location
- Northern Michigan. Smelt City
There is/was a M35 PTO and shaft for sale in the classifieds for $200. You will also need the linkage and winch extensions for your M35.
The M211/135s have a Transfer case driven winch with two shafts and a pillow block. The only thing that is the same is the winch itself. Good luck.
The M211/135s have a Transfer case driven winch with two shafts and a pillow block. The only thing that is the same is the winch itself. Good luck.