chupa
New member
- 275
- 2
- 0
- Location
- Port Sulphur, La.
Will M35 window crank handles fit on a CUCV? I did a search, to no avail, so I'm asking via the forum.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
window crank handle
- Thread starter chupa
- Start date
- 8,400
- 2,442
- 113
- Location
- Monrovia, Ca.
No. They are standard GM crank handles. You can get them at Kragan, PepBoys, etc
chupa
New member
- 275
- 2
- 0
- Location
- Port Sulphur, La.
Sorry, I should have been more specific, can I retrofit M35 handles. Swap out M35 handles for CUCV?
- 34,014
- 1,814
- 113
- Location
- GA Mountains
Given and adequate amount of money and fabrication sklills, then yes!
Barrman
Well-known member
- 5,183
- 1,622
- 113
- Location
- Giddings, Texas
The M35 has a square post for the window crank handle. The CUCV has a round splined post for the handle.
The M35 handle is held on with a screw in the middle. The Chevy handle has a spring clip on the shaft behind the splines.
I suppose you could make a round peg fit a square hole, but it probably won't be worth the time and effort.
The M35 handle is held on with a screw in the middle. The Chevy handle has a spring clip on the shaft behind the splines.
I suppose you could make a round peg fit a square hole, but it probably won't be worth the time and effort.
chupa
New member
- 275
- 2
- 0
- Location
- Port Sulphur, La.
Thanks fellas. That's what I need to know. Scratch that mod'.