- 3,923
- 76
- 48
- Location
- Comfort, Texas
Looking good Brandon. 
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
THE JUSTIFIER Guntruck
- Thread starter AMGeneral
- Start date
vtdeucedriver
Well-known member
- 2,523
- 38
- 48
- Location
- Vermont
Great job on that Brandon. Did you have good pics of the exhaust to go by? When I talked with Charlie who drove Brutus, he is still in contact with the guy who changed the exhaust on it to go down below the fender. He is going to talk to him about braising mine together for me and I will ship him the pieces.
- 4,038
- 119
- 63
- Location
- Ponchatoula LA
This is going to be one sweet truck. keep the pics coming
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
I had several decent shots that had good close ups of the exhaust,I basically used a upper stack,2 ea 90 degree bends and it looks to be about a 45 deg bend to adapt to the turbo flange.
I actually stick welded all mine together with 3/32 7018 rods.
I should have the winch installed tomorrow evening.
Last edited:
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
I'm afraid I MAY have mentioned on the Guntruck site that JUSTIFIER Guntruck MAY be at this years Gathering.
No pressure intended of course Brother AMG.
No pressure intended of course Brother AMG.
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
No problem PB,I work well under pressure.I'm afraid I MAY have mentioned on the Guntruck site that JUSTIFIER Guntruck MAY be at this years Gathering.
No pressure intended of course Brother AMG.
BTW,I received a call from our supplier at work,my door armor should be here this week or early next week.
vtdeucedriver
Well-known member
- 2,523
- 38
- 48
- Location
- Vermont
Hey Brandon............................try and sneak into the SS chat room about 7pm for some GT builders chat. Been talking with one GT owner about this and trying to get in touch with another.
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
Will do Jeff.
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
Not much to update this weekend,I had to cut and split wood for heat this weekend.
I did get the winch installed as well as the exhaust roughly installed in place to mock up the exhaust hangers as well as the connection to the turbo outlet flange.
I also got the door hinge pins/door armor support pins ready for door armor installation.
Just 2 pictures though.
I did get the winch installed as well as the exhaust roughly installed in place to mock up the exhaust hangers as well as the connection to the turbo outlet flange.
I also got the door hinge pins/door armor support pins ready for door armor installation.
Just 2 pictures though.
Attachments
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Just curious: What kind of cable are you planning to wind onto the winch?
- 2,177
- 50
- 0
- Location
- Butler TN.
Winch cable!
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Badda-Bing!! That's funny! But, you know, getting at:tigger;1491162[COLOR=#ffff00 said:
- fiber-core, metal-core?
Prefer one to another?
Last edited:
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
Well the winch cable will probably be the LAST thing I buy, since I have 3 5 tons that need winch cable(total of 800 feet).
I plan to use 5/8 in 6X19 EIPS wire core rope,the manual calls for fiber core,but that seems to be special order at most cable dealers anymore.
Last price I got was about $1000 for 560 feet,now with 3 winches needing cable,it'll probably be closer to $1500.
vtdeucedriver
Well-known member
- 2,523
- 38
- 48
- Location
- Vermont
Thought I would share.
Attachments
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
Nothing much to update from this weekends work,I didn't like how the exhaust turned out,so I took it back off and re-welded it.
It looked and fit much better afterwards,now all that is left is to fabricate 2 supports to attach the exhaust to the fender supports.
I also did a little "tweaking" to the injection pump for a little added motivation for the added weight.
It looked and fit much better afterwards,now all that is left is to fabricate 2 supports to attach the exhaust to the fender supports.
I also did a little "tweaking" to the injection pump for a little added motivation for the added weight.
vtdeucedriver
Well-known member
- 2,523
- 38
- 48
- Location
- Vermont
Found the APC lights I had...........................ready for the bill
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
Did you find the MX-2799 antenna base as well?Found the APC lights I had...........................ready for the bill
Last edited:
Amer-team
Well-known member
- 1,707
- 32
- 48
- Location
- Centralia/WA
Are you scaling your conversion off pictures? It seems like these trucks are all fairly custom. You guys are causing my resolve to waver on keeping the M54A2 stock, even though it did time in the sandbox, and is still in original configuration.
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
I finally got the exhaust finished and installed this evening.I added 2 supports for the exhaust pipe that were not on the original Justifier,but the manifold would probably crack under the weight.
For historical accuracy,everything is being stick welded or brazed vs using a wire welder.
a few pictures
For historical accuracy,everything is being stick welded or brazed vs using a wire welder.
a few pictures
Attachments
Last edited: