96m1083
New member
- 27
- 0
- 0
- Location
- Wake Forest NC
Rotated 4 out of 6 tires, put the new ones on the front, replaced CTIS ECU with new one, fueled up
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your FMTV or LMTV today
- Thread starter Coffey1
- Start date
- 116
- 55
- 28
- Location
- Homer Glen, IL
Replaced the air/hydraulic pump and added a backup beeper kit to my M1084.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- 1,579
- 543
- 113
- Location
- Greenback, TN
Added a camper to the M-1082 trailer. Now have a 'guest bedroom" 
Attachments
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
sweet..... double Alaskan. Love it.Added a camper to the M-1082 trailer. Now have a 'guest bedroom"
- 62
- 1
- 8
- Location
- Atlanta GA
I have Air Conditioning
Andy and I installed my Coleman Roughneck Low Profile 13.5 BTU air conditioner. It’s running off my MEP-803A…..plenty of back-up power
. We did run it off the MEP-531 for a while, it ran it at 75% load, the 531 is noisy. It’s nice to have AC. This was the easiest and cheapest way for me to achieve AC. The Coleman was mid $800 range shipped to me…….already had the generators.
Andy and I installed my Coleman Roughneck Low Profile 13.5 BTU air conditioner. It’s running off my MEP-803A…..plenty of back-up power
. We did run it off the MEP-531 for a while, it ran it at 75% load, the 531 is noisy. It’s nice to have AC. This was the easiest and cheapest way for me to achieve AC. The Coleman was mid $800 range shipped to me…….already had the generators.Attachments
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
RE: the 531, diesel likes to be at a high load.... they work forever like that. I would build a quiet box for it and use the 531. Will sip less fuel and love its job. The 803a is under taxed ..... easier to coke up engine being under taxed and shorten its lifeAndy and I installed my Coleman Roughneck Low Profile 13.5 BTU air conditioner. It’s running off my MEP-803A…..plenty of back-up power
- 62
- 1
- 8
- Location
- Atlanta GA
I need to figure out how to quiet the 531 down......a lot, or hook up a clothes dryer to the 803 to put a load on it.
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
lot of threads and video's in many places on making sound boxes for generators. Would help to mount it as far back as possible on truck as well. Considering it will only really be used when driving.... should be able to push air into sound box pretty easy.. Install fan for idoling; maybe via thermostat inside sound box?
Last edited:
- 464
- 267
- 63
- Location
- Seville, OH
Seth, what electrical mods/additions have you done in the cab, or wish you had done?
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
Man, just like when I had the deuce and everyone was getting the 900 series the fmtv/lmtvs are growing more and more on me. Love the work you guys are all doing
- 3,748
- 1,521
- 113
- Location
- North Carolina - FINALLY !
Started installing the high speed gears in the 1078. Front was a complete axle swap already containing the 3:07 gears and next Monday finish the rear diff swap (with Locker!). With the truck already having the 290 hp upgrade, these gears should be perfect.
yertnamreg
Member
- 92
- 21
- 8
- Location
- Houston TX
I committed an atrocity and cut and welded my frame rails...
This is prep for a 22ft box body that is going on it.
This is prep for a 22ft box body that is going on it.
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
This is worthy of its own thread. Curious what weld technique / process you plan to use for adding additional length to your chassis. Example why splice instead of just adding to back end of chassis?
Last edited:
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
To keep it all in one place...... updated seats post instead of adding another post. added pic of installed seats (pre-new seat covers etc)
https://www.steelsoldiers.com/showt...r-LMTV-today&p=2150284&viewfull=1#post2150284
https://www.steelsoldiers.com/showt...r-LMTV-today&p=2150284&viewfull=1#post2150284
- 42
- 7
- 8
- Location
- Louisville, KY
After a year of electrical tracing, leaking fuel hoses, terminal cleaning, transmission work and replacing various parts I finally got my m1078 to start for the first time. Final issue was that someone had put a jumper on the 24v load and the 24v battery terminals on the load battery control device. After I took that off it started on the first push of the start button.
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Last edited:
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
much congrats..... bet that is such a relief.After a year of electrical tracing, leaking fuel hoses, terminal cleaning, transmission work and replacing various parts I finally got my m1078 to start for the first time. Final issue was that someone had put a jumper on the 24v load and the 24v battery terminals on the load battery control device. After I took that off it started on the first push of the start button.
wonder if that caused any potential damage further up the line? Any one got insight...... if not... might be an interesting hidden "defeat" "anti theft" thing one could add (but thru a switched solenoid)
Last edited:
- 464
- 267
- 63
- Location
- Seville, OH
What is the loose cable end on the left?
- 42
- 7
- 8
- Location
- Louisville, KY
That is a ground. I had it off to clean it and replace the bolt and washer that was holding it down. I don't know if this jumper wire is what did all the damage to my truck but something blew up the transmission controller and took 2 solenoids in the transmission with it.
Sent from my iPhone using Tapatalk Pro
Ronmar
Well-known member
- 3,845
- 7,474
- 113
- Location
- Port angeles wa
Well the labeling leads me to believe that is the polarity protection device. Diodes in an aluminum heatsync that only allow current to flow one direction. The only reason to bypass it would be if you suspected the diode was bad.
But lets play what if... So your are a new mechanic fresh out of school and full of “knowledge” and hookup batteries backward and of course nothing works. Then your vast intelect deduces that the polarity box has mysteriously gone bad as you have voltage up to the batt terminal(wrong polarity but it is present) but not onto the load terminal, so you bypass it and succeed in accomplishing what the box was put in there to prevent, and now things REALLY dont work as you have let the magic smoke out of them...
That little jumper by itself shouldnt cause any problem as current is supposed to flow between those two terminals if the batteries are hooked up correctly. Add in backward connected batteries however and I think that probably caused your issues...
Last edited: