-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What did you do to your deuce this week?
- Thread starter Seth_O
- Start date
- 3,256
- 3,349
- 113
- Location
- NORTH (Canada)
Please take pictures if you find that this mod works! It might help others.
Big Tom
Active member
- 212
- 114
- 43
- Location
- Millington md
Just got a second m35a2 drove it back from Iowa, 1075 miles what a great running truck Big Tom
Maverick1701
Well-known member
- 1,433
- 181
- 63
- Location
- Lubbock, TX
Big Tom
Active member
- 212
- 114
- 43
- Location
- Millington md
Well the old girls always look better when their upside down!!
Big Tom
Big Tom
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
- 98
- 1
- 8
- Location
- Adena, Ohio
It was bitten by a radioactive spider. Behold...........Spider Truck
- 98
- 1
- 8
- Location
- Adena, Ohio
Specs on the Case MX100 radiator 
- 98
- 1
- 8
- Location
- Adena, Ohio
Finished the alternator bracket. I wish there was a 24 hour hardware store around. Need some 1 inch long 7/16 bolts and lock washers.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Just wait 3-5 years:
- Drone will drop it on your doorstep within 60 minutes (30 minutes?), of your order
Last edited:
Aussie Bloke
Well-known member
- 725
- 373
- 63
- Location
- Lost, out bush in OZ
G'day everyone,....
Just came back in from giving my Deuce a once over by torchlight,....
Yeah, its night time here as I type this.
I haven't moved the Deuce since I parked it when I got back from Cruiserkhana,...
I did notice the left hand vented shield in the wheel arch isn't bolted down along the bottom,.. explains a rattling vibration I have had.
Also the left side of the engine between the oil filter canisters is wet and seems to have run down the side of the engine, not a lot, just enough to wet it a little.
Nothing I am concerned about but I will spray some degreaser on it and hose it off, I just like a clean engine bay,.....
I also found the bolts holding the rear mud guard on have come loose and will need tightening,....
And here is a strange thing, there are some strange brackets on the back side, I'll take some pics tomorrow, one even has a circular cup?
Not sure what the bracket is for but I am sure wiser minds will let me know.
I just need to give my Deuce a good sweep out and a little TLC, The other day I renewed its club rego so I am good to go for another year!
Aussie.
Just came back in from giving my Deuce a once over by torchlight,....
Yeah, its night time here as I type this.
I haven't moved the Deuce since I parked it when I got back from Cruiserkhana,...
I did notice the left hand vented shield in the wheel arch isn't bolted down along the bottom,.. explains a rattling vibration I have had.
Also the left side of the engine between the oil filter canisters is wet and seems to have run down the side of the engine, not a lot, just enough to wet it a little.
Nothing I am concerned about but I will spray some degreaser on it and hose it off, I just like a clean engine bay,.....
I also found the bolts holding the rear mud guard on have come loose and will need tightening,....
And here is a strange thing, there are some strange brackets on the back side, I'll take some pics tomorrow, one even has a circular cup?
Not sure what the bracket is for but I am sure wiser minds will let me know.
I just need to give my Deuce a good sweep out and a little TLC, The other day I renewed its club rego so I am good to go for another year!
Aussie.
FloridaAKM
Well-known member
- 2,699
- 392
- 83
- Location
- Gainesville, Florida
I checked out the Deuce & took her to work today @ the Chemical Plant where I work. Since it is a homeland security facility, security was quite surprised when I drove up to the gate @ 05:00 wait to get in & get to work. They finally realized who I was & was no threat & let me in. That was a first as I have had the truck for over 5 years & been here many times.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
FloridaAKM
Well-known member
- 2,699
- 392
- 83
- Location
- Gainesville, Florida
It made several people's day just seeing the old girl. She makes some of the older vets memories come back. 
- 98
- 1
- 8
- Location
- Adena, Ohio
Mounted the alternator, had to run to NAPA for some longer belts. Just waiting on the radiator to get done. The guy was able to repair it after all. I guess all it took was a little criticism about it being his job. He said that he is semi retired and usually stays away from that kind of job. I will save the Case tractor radiator that I bought for a Cummins swap because the core is too thick and the radiator guard would have to be moved 2" forward and the hood hold downs modified. 
Aussie Bloke
Well-known member
- 725
- 373
- 63
- Location
- Lost, out bush in OZ
G'day everyone,......
That's the bracket next to the support bracket.
On one side is a metal cup, I thought it might be a rubber bush or spacer but it is metal.
Its a separate item so not sure what its purpose is,...?
Anyone know?
Aussie.
That's the bracket next to the support bracket.
On one side is a metal cup, I thought it might be a rubber bush or spacer but it is metal.
Its a separate item so not sure what its purpose is,...?
Anyone know?
Aussie.
- 18,541
- 5,847
- 113
I actually have no idea what that bracket is for.
But I've just got to add this: "It's there to make young troops ask questions..... Now carry on."
- 1,890
- 1,480
- 113
- Location
- Laramie County, Wyoming
Hi, looked at your mystery bracket but I need a clarification on one of the pictures. Do the two parts I have marked with arrows align with each other? Is there a hole through the beam that links these two parts?
Attachments
Last edited:
Aussie Bloke
Well-known member
- 725
- 373
- 63
- Location
- Lost, out bush in OZ
G'day everyone,.....
Each of those brackets are at the top of each mug guard support, the one with the cup is at the support on the outside and both face the same way, neither face each other.
And no, there isn't a hole as they are not connected.
And Nomad1, I have a A3 bed. (dropside).
Aussie.
Each of those brackets are at the top of each mug guard support, the one with the cup is at the support on the outside and both face the same way, neither face each other.
And no, there isn't a hole as they are not connected.
And Nomad1, I have a A3 bed. (dropside).
Aussie.
Last edited: