• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M220 winch

M221Jimmy

New member
10
4
3
Location
Brady, Ne
Hello everybody!!!

I just picked up a winch for one of my GMCs. I had plans of putting it on my M220 but after looking at the tm...it doesn't list a weight for M220 w/winch. Does anybody know if the the M220 every came with a winch.
I don't have any issue putting it on my M221 if they didn't in the interest of keeping it close to original.
 

USMC 00-08

Well-known member
1,162
126
63
Location
Skiatook, OK
I can't find any reference to the M220 having a winch in any of the TMs. There are some pictures on Google of a winch on an M220, but they are newer photos.

If you put the winch on your M220, I doubt anyone would say anything about it being incorrect.

Is that your truck in your avatar? If so, I'd love to see more pictures of it!
 

M221Jimmy

New member
10
4
3
Location
Brady, Ne
Thank you for the reply...i am still debating which way to go.

Yes that is one of my trucks in the avatar thing. I don't have very much on my phone in the line of photos but I'll try to remember to get some off the computer.

That truck went thru a 3 month mechanical and cosmetic reatoration to make it in time for the MVPA transcontinental convoy last year...ps it sat for 20+ years before the decision was made to get it done.
 

ltdaniel

New member
15
14
3
Location
Simi Valley, Ca
Your Truck looked and performed well on the convoy, as for your question on the winch on your truck tractor if you like it do it! A good example is my M135 it is on the road and it runs great at 55 mph, but for the next North West Park Convoy we will be camping in the back, but the top bows on the trucks used in the US only had 5 feet of head room so you cant stand up in the back. It seems the the Canadian Army had a better idea and raised up the side stakes 1 ft and pined them there so you have 6 ft of headroom in the back. This also means you have to use the Canadian pattern canvas of which I found a full set of NOS front and back curtains and the cargo top with the 12 inch extension the folds down when the top in in the raised position.

I have attached a photo of my truck with the new rear curtain installed with the rear bow in the raised position and the 12 in flap down.

Enjoy

Hope to see you on another convoy

Lt Dan
Convoy commander TCM 19 and NWP 20
 

Attachments

Last edited:

M221Jimmy

New member
10
4
3
Location
Brady, Ne
Thanks for the advice Lt. Dan!!!

Im going to put the winch on the M221. I'm in the process of buying a M211 w/winch and I'm planning on putting that winch on the M220 temporarily in preparation for Alcan '22 (any word on if that is being/has been planned??).

Your M135 looks very complete and solid. Does it have front lockouts? (The hubs look longer than on my M135). I would recommend pulling the head and getting hardened seats in the head for the exhaust valves. They don't seem to like the new fuel for very long in stock form. I bought all new exhaust valves for all my 302s and just had 2 heads done. I have put one on the M221 so far and it runs much better than before...Well worth the $$$ for longevity.

JT
 

ltdaniel

New member
15
14
3
Location
Simi Valley, Ca
The M135 came with Selectro free wheeling hubs, so i is the widest part of the truck, thinking about putting the driving flanges back on, I have taken the hubs off all my Jeeps as I just don't put that many miles on them.

As for the next convoy we may have to postpone the NWP'20 convoy we are trying to do this August till 2022, in 2020 is the Yellowstone trail from Seattle to West Point NY with a stop at the South Bend IN convention.

Not sure when we will go back to Alaska.

I recieved the new Canadian Cargo Top and here it is in up position that gives me 6 foot of head room in the back of the truck.20200506_115534.jpg
 
Last edited:

DeeboM135

Member
17
26
13
Location
Cold Lake,AB
The M135 came with Selectro free wheeling hubs, so i is the widest part of the truck, thinking about putting the driving flanges back on, I have taken the hubs off all my Jeeps as I just don't put that many miles on them.

As for the next convoy we may have to postpone the NWP'20 convoy we are trying to do this August till 2022, in 2020 is the Yellowstone trail from Seattle to West Point NY with a stop at the South Bend IN convention.

Not sure when we will go back to Alaska.

I recieved the new Canadian Cargo Top and here it is in up position that gives me 6 foot of head room in the back of the truck.View attachment 799987
Where did you source the Canadian cargo top from?
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks