• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

I have joined the club ! And yes I have lost my mine !

1951M1078

Well-known member
1,018
184
63
Location
Glendale,AZ
Two panels installed. What a pain.
Do NOT us old Sika ! My bad but I got it in April. Stored at 45 deg. +-. And it would almost not come out.( after letting come to room temp ) Then BOOM ! It is now coming out every where !
Don't forget your rubber gloves !

Maybe the next two panels will go better !
IMG_0741.JPGIMG_0744.JPGimg_0753b.jpg

Oh, and having a roof hatch is the best ! And later it will help with keeping the panels clean .
 

Reworked LMTV

Well-known member
1,449
1,124
113
Location
TN

Reworked LMTV

Well-known member
1,449
1,124
113
Location
TN
Going to invert to 120 for AC stuff and the mini-split AC unit.
Also going to convert some to 12 volt .
At the higher voltages, be sure to physically separate the wiring of the 2 voltages widely. GFCI and arc fault breakers are typically used. The smaller splits will do 120, but around 18k, you will need 220. Take a look at National Electric Code, particularly the area of bonding vs grounding. There actually is an RV electrical code somewhere on the internet.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks