- 1,215
- 2,164
- 113
- Location
- Wenatchee, WA
To change the direction of the tank's outlet pipe i sourced a 1 1/4" mandrel bent 90° stainless elbow with rolled beads from a fuel filler neck company and then shortened one leg to allow it to fit between the tank pipe and the engine block.
![20210611_090841.jpg 20210611_090841.jpg](https://www.steelsoldiers.com/data/attachments/595/595044-df6a5643bcd9ff78efb1c78076770c03.jpg)
![20210612_174807.jpg 20210612_174807.jpg](https://www.steelsoldiers.com/data/attachments/595/595045-e45b6eb34abbbda791bdeb8cdfba1364.jpg)
![20210612_174802.jpg 20210612_174802.jpg](https://www.steelsoldiers.com/data/attachments/595/595047-5e07cfa8a59ceabe8181a7378f7cb02d.jpg)
The TIG guy said that "walking the cup" was especially difficult on this because the polished stainless was so slippery.
![20210612_174923.jpg 20210612_174923.jpg](https://www.steelsoldiers.com/data/attachments/595/595046-189a0446bcd9c5096eafabc9738a5757.jpg)
Now I just need to find a heavy-duty yet flexible radiator hose to connect this elbow to the oil cooler? housing.
![20210611_090841.jpg 20210611_090841.jpg](https://www.steelsoldiers.com/data/attachments/595/595044-df6a5643bcd9ff78efb1c78076770c03.jpg)
![20210612_174807.jpg 20210612_174807.jpg](https://www.steelsoldiers.com/data/attachments/595/595045-e45b6eb34abbbda791bdeb8cdfba1364.jpg)
![20210612_174802.jpg 20210612_174802.jpg](https://www.steelsoldiers.com/data/attachments/595/595047-5e07cfa8a59ceabe8181a7378f7cb02d.jpg)
The TIG guy said that "walking the cup" was especially difficult on this because the polished stainless was so slippery.
![20210612_174923.jpg 20210612_174923.jpg](https://www.steelsoldiers.com/data/attachments/595/595046-189a0446bcd9c5096eafabc9738a5757.jpg)
Now I just need to find a heavy-duty yet flexible radiator hose to connect this elbow to the oil cooler? housing.
Last edited: