- 7,575
- 19,461
- 113
- Location
- Charlotte NC
.so basically you lost your nuts??! would i be able to con you out of 3 sets of rod bolts??
@1944mb ,
If I had some, they would be all yours...
Hate to say I have none
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
.so basically you lost your nuts??! would i be able to con you out of 3 sets of rod bolts??
In an age of cheap throw-away manufacturing, all that cast metal is a beautiful sight:Finally got a stubby 1/2" wrench on the bolt because access to the 5/8 lock nut needed a bendy wrench that I will make one day.
View attachment 871924
Could you extort me out of the rod bolts instead? Getting conned just makes a fella look weak but being extorted takes skill so I would feel less gullible. I think we can set you up. Most Rod bolts are still in the connecting rods but we have some spare parts. As per Rusty and the rest of the metal boys, the damaged engine will keep all parts and go straight to the wrecker so you won't get any stuff we think has been beat.so basically you lost your nuts??! would i be able to con you out of 3 sets of rod bolts??
plowboy, you are a funny man, and that is appreciated!Could you extort me out of the rod bolts instead? Getting conned just makes a fella look weak but being extorted takes skill so I would feel less gullible.
View attachment 872097View attachment 872103
I haven't found anything recently worthy of photographs let alone sending to you.....yet. We might see the buried trucks by the end of the week so I will share what we find. Every so often I do that search for "military surplus cab heater" and they don't show up all the time. This was one I just found but is it what you need or are you trying to remain 'authentic'? .....you big ol' purist you. https://www.easternsurplus.net/PartDetails/6186/9M-874-Personnel-Compartment-Heater-HW30-4-939That is quite a find!!
Any complete G749 cab heater kits hidden anywhere?
That's a niced haul of Stuff, there; yessir!!There's some crazy stuff showing up at the G749 farm. Parts of the AM General M151 Mutt....all cut up.....on contract.
View attachment 872290
I was sure hoping we weren't going to get skunked with all the good stuff that was coming out of the wrecker. It turns out the real Skunks don't care what I hope for and I was getting skunked one way or the other. Cool little visitor to the G749 farm posing in front of the P-4.That is quite a find!!
Any complete G749 cab heater kits hidden anywhere?
A Striped Skunk. love those little fellers; very cool.
That's good timing, ironic, funny and saved me a ton of time. I was just telling Soldier B Mattech that my eidetic memory knew it saw pictures of the heater install kit. It didn't know where or when so thank you.Sure looks like this to me from what I see in your pictures.
View attachment 872746View attachment 872747View attachment 872748View attachment 872749
View attachment 872750View attachment 872751View attachment 872752View attachment 872753
Cool. A new word I never knew!That's good timing, ironic, funny and saved me a ton of time. I was just telling Soldier B Mattech that my eidetic memory knew it saw pictures of the heater install kit.
I watch TV. The Big Bang Theory. Sheldon had an eidetic memory and although I'm no Sheldon, I can often recall where I saw a photo or a sentence....for some odd reason. I'm not always sure where my keys are......but I can picture them.Cool. A new word I never knew!
Plowboy, you're the Best!!
Man. Who else in the WORLD would know that "fun fact"/ Critical Detail but rustystud; no one else on this Planet:Chevy straight six engines all had super tight clearances because of the longer stroke used in these engines. So the rod bolts had to have an "angle" cut in them so they could clear the engine block under the cylinder. If you install the rod bolts incorrectly you will hit the bottom of the cylinder bore.
Hey, speaking of forging, I just found out Tesla worked with some European company to build the best forging press on the planet....so far. Hot aluminum is injected into some very complex forms for large automotive parts....not too fast or it creates bubbles and not too slow or the aluminum cools....https://www.youtube.com/watch?v=8rWCTasV2t0In an age of cheap throw-away manufacturing, all that cast metal is a beautiful sight:
- Including that solid (forged?) little stubby!
Thanks Ahab, but I'm just old enough to have rebuilt them in the past. Back then they still came in the shop.Man. Who else in the WORLD would know that "fun fact"/ Critical Detail but rustystud; no one else on this Planet:
- Wizard Extraordinaire
They should declare you a National Treasure, Brother!!