cucvrus
Well-known member
- 11,388
- 10,076
- 113
- Location
- Jonestown Pennsylvania
I eliminated the CUCV 360* swivel pintle hitch from the receiver and replaced it with a fixed pintle. Easy as that. It works well and is the correct height. I used some of my fancy hardware with the nuts that have their own wrench built into them. They will work out great. I use the same nuts when I assemble rear bumpers and bumper brackets on CUCV's. Have a Great Day. I have a lot to do, and I get it done one step at a time.
I even remained secret. No picture of my license plate.
![DSCF8626.JPG DSCF8626.JPG](https://www.steelsoldiers.com/data/attachments/627/627725-bdd98ba5945e77e6319351fa9b168d8b.jpg)
![DSCF8627.JPG DSCF8627.JPG](https://www.steelsoldiers.com/data/attachments/627/627726-ee5facda06ecf7f9d66cc63cb9e52541.jpg)
![DSCF8628.JPG DSCF8628.JPG](https://www.steelsoldiers.com/data/attachments/627/627727-8c983ef1e89f734e20c9280924e4a2b9.jpg)