- 753
- 1,331
- 93
- Location
- Highland, Indiana
Hood installed. Never again cheap Taiwan crap. Next to button up all the lights and dash.
![](http://uploads.tapatalk-cdn.com/20220829/58cf5230417995877c2eed20ca4a6456.jpg)
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Looks great! What paint brand/type did you end up using? 383 for color I’m assuming too right?Hood installed. Never again cheap Taiwan crap. Next to button up all the lights and dash.![]()
Thanks! Yes 383. Rapco is the brand. Bought from quarterton. Bought two gallons. Thinned with acetone. Spray cans for touch up.Looks great! What paint brand/type did you end up using? 383 for color I’m assuming too right?
Looks greatHere's a better picture of the color. I think the other had a filter.![]()
Thanks! Trying to decide on if I'm going to put the tp and diesel fuel stencils.Looks great
That's personal preference I like it if it has the bumper lettering to, unit numbers and such. Im going to do custom stencils on my 09. Where a civi would say K5 Blazer I'm going to stencil on M1009Thanks! Trying to decide on if I'm going to put the tp and diesel fuel stencils.
Get the bolts and washers out of the clamping plate and retain them. What about up on the frame the clamping clamps? One on each frame rail up front. I have the sway bar. Get back to me about the retainers for the sway bar. Again take some pictures.
No retainers on the frame. Im at work right now so can't get any more pictures at the moment. I can try to get some when I get off this afternoon.Get the bolts and washers out of the clamping plate and retain them. What about up on the frame the clamping clamps? One on each frame rail up front. I have the sway bar. Get back to me about the retainers for the sway bar. Again take some pictures.
Love the seats, custom?New door panels for the m1028. Along with a new high/low beam dimmer switch on the column. Marines had a jumper across from the parking lights to headlights to get them to work. Simple 8 dollar switch and works like a charm! Changed out headlight switch while I had dash apart as well.![]()
![]()
These are the factory seats that were in it from USMC. I think the dash was custom covered in vinyl that was stitched.Love the seats, custom?
.Thank you Cucvrus! Bridge plate installed!![]()
Now for a set of Truck-Lite LED Headlights……:Thank you Cucvrus! Bridge plate installed!![]()