- 673
- 894
- 93
- Location
- SW Va, Roanoke County
Anyone have a 3116 laying about that they are parting out, I need this timing inner item 5 of TM, and seems it is not available in the used market.
PM me please!!
PM me please!!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
MV Addiction filled. Reis the Beast M1078A0 is born
- Thread starter M1078MAN
- Start date
- 434
- 206
- 43
- Location
- Lynchburg, VA
What are those?
- 434
- 206
- 43
- Location
- Lynchburg, VA
Have you tried calling Sonny Merryman, Inc? sonnymerryman dot com
you also have a decent CAT dealer down there... no leads from them?
- 673
- 894
- 93
- Location
- SW Va, Roanoke County
CTIS wheel valve rebuild kits
They are some big and long bolts for an FMTV CTIS wheel valve.
Did you ever find the problem with your hand pump issue?
- 673
- 894
- 93
- Location
- SW Va, Roanoke County
It's funny you mention that..I thought so to..but the part number matches..I will have to take a look
Nope. Still have to put fluid in hand pump to get the cab up..up it shall stay until I can get the timing cover replaced
Update on cover..while I sit here waiting for a deer to cross the hairs. I get a text message..part has been located..bummer cost me 750..oh well should be delivered friday or sat
Wish all our Vets a happy veterans day..we earned it
Last edited:
Oh yeah, definitely the timing cover comes first!
Good luck!
- 673
- 894
- 93
- Location
- SW Va, Roanoke County
\\MAIL CALL//
Wow is all I can say..a supposed used part appears to be brand new
Wow is all I can say..a supposed used part appears to be brand new
Nice haul . Looks damn new!
Where did you dig that up from?
- 673
- 894
- 93
- Location
- SW Va, Roanoke County
www.allpartsmachinery dot.com
I have no affiliation with this company, was recommended by a local CAT dealer as a place to source used parts. Painless parts request process, ultra quick ship, great communication, and as I mentioned, appears to be brand new.. just saying, thumbs up in my lil book
Last edited:
- 673
- 894
- 93
- Location
- SW Va, Roanoke County
Holy, has it really been since Nov 21 that I posted, sad seeing RTB sitting in the back 40, lacking attention
Finally getting some time to get some needed work done.. ordered up the gasket set for the front cover, found a NOS CAT set on fleabay. Going to start tearing it down this weekend, time consuming, but doesn't look to terrible.
Hope everyone is doing well, looks like I got some catch up to do
Finally getting some time to get some needed work done.. ordered up the gasket set for the front cover, found a NOS CAT set on fleabay. Going to start tearing it down this weekend, time consuming, but doesn't look to terrible.
Hope everyone is doing well, looks like I got some catch up to do
- 434
- 206
- 43
- Location
- Lynchburg, VA
Howdy stranger. Bring on the updates!
- 673
- 894
- 93
- Location
- SW Va, Roanoke County
Spent a few hours today putting 2ea NOS CTIS wheel valve assemblies and aired up the two tires.. Looks much better, also spent some time on batteries, seems I need a new one, going to go to screw on terminals and new cables..1 looks like Mr Snow man attached part of his ask to the terminal.
I also replaced the brake protection valve the one on the wet tank, TY to Shaun F/Abel and fleabay
Haldex 314013005 Air Brake Pressure Protection Valve
With the weather, didn't get as much time to start on the front case, did eyeball it some more though.
Checked solar, and she is chugging away flawlessly
I am looking at a pile of parts, inverter charger, new water pump, new propane water heater, tie rod rubbers, cab mount bushings. Safety wise thinking about mounting the JP8 fired heater outside, reduce any concerns with exhaust
A cheap plug for my new 12x24 work shop, that took a few days to put the platform together
I also replaced the brake protection valve the one on the wet tank, TY to Shaun F/Abel and fleabay
Haldex 314013005 Air Brake Pressure Protection Valve
With the weather, didn't get as much time to start on the front case, did eyeball it some more though.
Checked solar, and she is chugging away flawlessly
I am looking at a pile of parts, inverter charger, new water pump, new propane water heater, tie rod rubbers, cab mount bushings. Safety wise thinking about mounting the JP8 fired heater outside, reduce any concerns with exhaust
A cheap plug for my new 12x24 work shop, that took a few days to put the platform together
Last edited:
- 434
- 206
- 43
- Location
- Lynchburg, VA
Half of the fun of this thread is the pics. So that I can go back and find/fix all of this stuff when I get a M107XA1. So I signed in and...
- 673
- 894
- 93
- Location
- SW Va, Roanoke County
I get it, a little rusty, will fixHalf of the fun of this thread is the pics. So that I can go back and find/fix all of this stuff when I get a M107XA1. So I signed in and...
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Now that is some good thinking:
- You might notice CO2 problems awake, but you sure won't notice them asleep
Except that you will sleep the big sleep, for a long L-O-N-G time!
- 434
- 206
- 43
- Location
- Lynchburg, VA
What's that on the lid of your shop? It looks like it's laid out over the asphalt shingles?
- 673
- 894
- 93
- Location
- SW Va, Roanoke County
A secret reveal...jk, the building is a prefab, and they put heavy mil plastic over the shingles while in transport, I just have not removed. Eventually SOLAR
- 434
- 206
- 43
- Location
- Lynchburg, VA
Please tell me your shed doesn't identify as something other than wood...