• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Easiest way to swap bushings?

ramdough

Well-known member
1,554
1,729
113
Location
Austin, Texas
Was there any trick to this?
I installed the inner tube in the upper bushing.

After you put the weight of the cab on the upper bushing, the bolt and inner tube will hang down a little bit.

Press the lower bushing over the inner tube and it should stay put. Then you just have a big washer an nut to install.

If you had one small hand, like a crab….. or a kid or smaller person, they could hold the washer while you get your first thread started on the nut. I had neither and kept dropping the nut. Use finger tips to get it started.


Sent from my iPhone using Tapatalk
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks