• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Easiest way to swap bushings?

ramdough

Well-known member
1,554
1,729
113
Location
Austin, Texas
Was there any trick to this?
I installed the inner tube in the upper bushing.

After you put the weight of the cab on the upper bushing, the bolt and inner tube will hang down a little bit.

Press the lower bushing over the inner tube and it should stay put. Then you just have a big washer an nut to install.

If you had one small hand, like a crab….. or a kid or smaller person, they could hold the washer while you get your first thread started on the nut. I had neither and kept dropping the nut. Use finger tips to get it started.


Sent from my iPhone using Tapatalk
 
Top