- 3,859
- 2,465
- 113
- Location
- Hiawassee, Georgia
I've now discovered the problem with my Intermediate Speed Control. The piston in the actuator is completely seized up. I removed the actuator and the cover on one end of the actuator, along with the pin that moves the gears, but I haven't been able to get the M48X1.5 hex plug on the other end to budge. I was using a tool on the plug that I made, but I was bending it. I believe the hex wrench size is 22 mm and I ordered one which is due to arrive tomorrow so when it arrives I'll be able to put a lot more torque on it. I may even try an impact wrench. I had a very difficult time removing the top plate with the actuator. It was really stuck. I ended up using a long crowbar and had to put all of my weight on the end to get it to pop loose. I only used the crowbar after I found out the Expedition Imports had a new one in stock, albeit very expensive.
![Intermediate Speed Control Transmission Top.jpg Intermediate Speed Control Transmission Top.jpg](https://www.steelsoldiers.com/data/attachments/651/651395-666997971d49a82b925806e1ba381993.jpg)
![Underside of Transmission Top.jpg Underside of Transmission Top.jpg](https://www.steelsoldiers.com/data/attachments/651/651396-23047970b23ce392f69f1c3515d877e3.jpg)
![Top of Trans.jpg Top of Trans.jpg](https://www.steelsoldiers.com/data/attachments/651/651398-2fcad849fbc29563c593c48d39709748.jpg)
![Intermediate Speed Control Transmission Top.jpg Intermediate Speed Control Transmission Top.jpg](https://www.steelsoldiers.com/data/attachments/651/651395-666997971d49a82b925806e1ba381993.jpg)
![Underside of Transmission Top.jpg Underside of Transmission Top.jpg](https://www.steelsoldiers.com/data/attachments/651/651396-23047970b23ce392f69f1c3515d877e3.jpg)
![Top of Trans.jpg Top of Trans.jpg](https://www.steelsoldiers.com/data/attachments/651/651398-2fcad849fbc29563c593c48d39709748.jpg)