MilitaryRestoration
New member
- 1,279
- 1
- 0
- Location
- Vancouver/Yakima, Wa
no they shouldnt need to be machined it should already be beveled on those wheels... at least it is on mine...
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
FYI!!! HEMTT rims....
- Thread starter dm22630
- Start date
area52
Active member
- 1,950
- 5
- 38
- Location
- San Bernardino CA
Hey DM22630 - did you ever get the part number for the budcaps?
dm22630
New member
- 1,424
- 42
- 0
- Location
- Front Royal, VA 22630
The budcaps are Dayton 13-3005R & 13-3005L ($1.50/each)
The outer lugnuts are Euclid E5977L & E5977R ($0.55/each)
I would suggest replacing ALL the current budcaps & outer lugs w/new ones.
406 YJ
New member
- 13
- 1
- 0
- Location
- WICHITA, KANSAS
Are these what you are looking for
I happen to have a few of them siting around in my plant
I happen to have a few of them siting around in my plant
area52
Active member
- 1,950
- 5
- 38
- Location
- San Bernardino CA
Are these what you are looking for
I happen to have a few of them siting around in my plant
Dang, where did you get all those?
dm22630
New member
- 1,424
- 42
- 0
- Location
- Front Royal, VA 22630
area52
Active member
- 1,950
- 5
- 38
- Location
- San Bernardino CA
I wondered who bought all those from GL, now I know!!
I am satisfied with one pallet (for now).
I am satisfied with one pallet (for now).
grounded
Banned
- 928
- 0
- 0
- Location
- defiance oh
vinny-socom1
New member
- 1,360
- 4
- 0
- Location
- Ocala, Florida
I'm glad I'm running the super single rims on mine with no lug/stud issues. I've got all of the bud caps and lugs from both of my trucks if someone wants to buy them PM me an offer. Vinny
jeep thing
Member
- 34
- 0
- 6
- Location
- swedesboro,NJ
are they the same size studs as a 2.5 ton,if so a buddy got me some that fit 2.5 ton just they were 3/4" to 1" longer,he did not get through milatary, and it cost me 250.00 for enough them for my jeep centers,but if your stuck there is a way to fix problem
Use threadlocker on the budcap-to-hub. You won't need to be removing them anymore anyway. If you don't and you try to remove the wheel, some lugnuts may break loose and some caps may break loose (with the lugnut still tight on the cap-clamping the rim to the cap). Could be a real PITA.
406 YJ
New member
- 13
- 1
- 0
- Location
- WICHITA, KANSAS
My shipping rates are Killer if you know of anyone looking for them. They are new. I am a vendor on Pirate4x4
As for the other post. I wondered who bought all of them too. I was going to recenter them and score some pvc for inserts to make them double beadlocks like the H1's that I sell but I have enough work right now so I'm just going to turn them.
hoopsoft
New member
- 206
- 0
- 0
- Location
- Purcell, OK
are the bud caps on 2.5 and 5 tons the same?
dm22630
New member
- 1,424
- 42
- 0
- Location
- Front Royal, VA 22630
Yes
vinny-socom1
New member
- 1,360
- 4
- 0
- Location
- Ocala, Florida
Scout
Member
- 94
- 4
- 8
- Location
- Scottsville, NY
Isn't there a stength/safety sacrifice using this method? The recess in the hub is not deep enough for the budd cap "lip" to fully recess into, and is now a spacer between the mounting flange and the rim. The rim is not pressed against (and fully supported by) the hub flange. I could see where machining off the tapered lip at the base of the budd cap would take care of that issue.
acesneights1
Member
- 1,449
- 22
- 20
- Location
- CT
I know this is old but I am at this point. Is it best to machine the buddy caps because to me that seems like as much work to change to the proper studs since I have to pull all my hubs anyway for wheel cyl sand a repack.
silverstate55
Unemployable
- 2,075
- 872
- 113
- Location
- UT
These worked for me.
- 6,069
- 4,430
- 113
And for me...
Last edited:
I doubt that it matters that the bevel is conical, not straight. These are for the Alcoa aluminum wheels, which have more of a ball and socket mating surface...but appear to do the job. Have you checked them for wear after using them a while?