• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by atbhaack

  1. A

    Separating water from oil without a heat source?

    seperating water from oil with out a heat sourse? So just shows u cannot trust any oil. The oil at my hobby shop that me and a couple guys have was susposed to only be oil and ATF. We have seperate drum for other. Well I trusted it and dump 10 gallons of diesel into it stired it up and sucked...
  2. A

    ATF in M35A3 CAT 3116

    So every one think I'm crazy that I have been running 80 % waste motor oil in a cat 3116? I filter to 1 micron and the truck has never ran better. Smokes less on it and starts better. Runs 20* hotter on the gauge. Only thing I miss is that diesel smell.
  3. A

    Separating water from oil without a heat source?

    seperating water from oil with out a heat sourse? What u guys do with that water? I drain some oil off and take it to city oil disposal.
  4. A

    Cat 3116 running vmo

    when I ran #2 in mine I used lucus. With the wmo I use 6 oz of seafoam for a 55 gallon drum. I also run some acetone in it. That really helps the milage. That people debate about more then the oil.
  5. A

    Cat 3116 running vmo

    6.2 and 6.5 I never heard any real problems but lack of power. Just like any motor, running out of the sweet zone and boom! I believe that is the problem with cat 3116 and the multi. Both motors you hear of a full long life, from responsible drivers.
  6. A

    Cat 3116 running vmo

    I understand what you guys are saying, but I have already saved over 3k in fuel and if it goes another 10k with out problems then that turns to 6k. It seems to run smoother and quieter on the oil, and has more power. It does run about 20 degrees warmer. I have a fuel heater on it as well...
  7. A

    Cat 3116 running vmo

    Hello, I have been running Wmo in my cat motor, and am up to 80% wmo. I filter it to 1 micron using the oiltofuel system. I haven't had any problem and wondering if anyone is running more then 80%
  8. A

    WVO in a Cat 3116

    it is a all mechanical engine, I know cat has a 2 micron filter and not sure how that would work with wvo. I have sseen in other posts that wmo is a bad ideal in them.
  9. A

    WVO in a Cat 3116

    I was wondering if there is any reason not to do this? I was going to run two tanks with a arctic fox in one. What are the thoughts?
  10. A

    Help w/ where to buying 1st deuce and half.

    I am waiting on a euc for about 80 days now!
  11. A

    My Bobbed Deuce is almost done

    I would be interested in one.
  12. A

    True Power Steering

    what steering box is that?
  13. A

    Info Needed on Air Assist Steering Kit

    were is a good place to get a kit?
  14. A

    Bobbing a deuce How to?

    What weight springs are you guys using for your trucks? I am wanting to run 3/4 or 1 ton leafs and have some air springs that are good for 5k of weight. I want to smooth the ride but not limit weight capacity.
  15. A

    Deuce Mechanics in the Dallas / FtW / Denton Texas Area

    I live in Denton and just bought my first too. Haven't got it yet as I have to wait for a euc to clear. In 6 months or so the guys and me at Tommy's Hi Tech will know since we are going though the whole truck. :D
See more
108,262members
163,597threads
2,302,000posts
1,625online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks