Recent content by GunnyM1009

  1. GunnyM1009

    Refreshing Gunny the thread.

    I just wanted to give an update on the transmission situation. I can't find anything wrong with my rebuild so instead going in and out with it a bunch I am just going to save up and get a Monster Transmissions TH400 to put in him. I should be able to order it around May of 2023. At least it...
  2. GunnyM1009

    Refreshing Gunny the thread.

    This, there is a valve inside. The weights on one end open up as it spins which in turn moves the valve. It has a lot to do with shift points.
  3. GunnyM1009

    Refreshing Gunny the thread.

    So after trying multiple things like checking the vacuum, modulator, governor etc. I came to the conclusion I missed something or did something wrong on the rebuild. To my dismay the transmission has to come back out. I'm not giving up though. I'm going to go back through it and see if I can...
  4. GunnyM1009

    Refreshing Gunny the thread.

    It's all good I'll figure it out. Every friction, steel, bearing, and bushing was replaced in it. It was a complete rebuild. I just ordered another torque converter to see if that's the issue. I know everyone one can make mistakes but I was very meticulous while rebuilding that Trans. I just...
  5. GunnyM1009

    Refreshing Gunny the thread.

    I rebuilt the Trans following a manual step by step. It is possible I screwed something up.
  6. GunnyM1009

    Refreshing Gunny the thread.

    When put in drive it seems to shutter or slip as I'm accelerating then it won't shift. I'm starting to think it may be the torque converter. It's a new reman torque converter from Autozone. Is it possible or am I way off base.
  7. GunnyM1009

    Refreshing Gunny the thread.

    Vacuum is fine now that last photo was vacuum at the Trans metal tube. The rubber line between the metal line and the modulator is new as is the modulator.
  8. GunnyM1009

    Refreshing Gunny the thread.

    Found a bad vacuum line. This is at the Trans now but still no shift
  9. GunnyM1009

    Refreshing Gunny the thread.

    So this doesn't seem right
  10. GunnyM1009

    Refreshing Gunny the thread.

    This is what the vac gauge is doing @cucvrus
  11. GunnyM1009

    Refreshing Gunny the thread.

  12. GunnyM1009

    Refreshing Gunny the thread.

    Been a while since I updated. Got the transmission and transfer case put in yesterday. Pretty down this morning due to getting the fluid topped off and taking him down the road he's not shifting out.
  13. GunnyM1009

    Talk to me about horns

    Different connection type but same style caps. I had to splice a piece of wire in to bypass mine due to it not being long enough after taking the caps out of the loop. If you pull your driver side headlight trim you should be able to get access to them.
  14. GunnyM1009

    Talk to me about horns

    There's some next to the horn as well
  15. GunnyM1009

    Flat clear over 383?

    And that's why I asked before I did it. Appreciate the reply.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks