Recent content by nanlin

I just called Oshkosh at 920-235-9150 to ask for a PDF copy of the TM. They said No since the rights were sold to the USA. They did say we can call tech support with questions. 1-800-392-9921 Option 2. Hopefully they can help with my water leaking problems.

Frank8003, THANK YOU THANK YOU!!

Thank you frank8003! Yes, that USMC one would be what I need. Any chance you or anyone know where I can download or pay for a hard copy somewhere? I think someone on this thread had some leads few years back... Thanks in advance.

Hi guys, I just got a USMC P-19A. Any chance someone can share a copy of the TMs with me? Thanks in advance!!

As you probably remeber, I got the trailers from Barstow to Sacramento with all you guys' help. Trying to tow with Range Rover Sport, but even with a riser the hitch is much lower than the ring. I swapped out the tires and still could not tow evenly. I always thought this would be a viable...

I finally got it done!

Sorry, have been hibernating... I lowered one of the trailers with 8x6.5 wheel and Bridgestone V-Steel 245/75/16 tires. Since the height difference of the tires was about 7 inches, the end result was lowering the trailer by just about 3.5 inches. So sadly, with maximum riser on my Range Rover...

Swapped out all 1251 bulbs with Napa 67 and 97 bulbs today. Worked well. Don't know what the difference is between 67 and 97. Made an adapter from 4 flat to mil 12 pin. Works. White (ground) = D Brown (tail/running) = E Yellow (left) = B Green (right) = J Made a mistake when using a much...

Mailsail, your math is fine, but my brain cells weren't! From the base of my 2 inch receiver to deck is 12 inches. The riser is 12 inches, but the base of the pintle-ball hitch rises only 8 inches, so my net increase is 20 inches from deck. The base of the M1102 lunette, at level, is 28...

Thanks HarleyHouse. Wish I could use Rover wheels to match each other...

Thanks Chevimp63!! Looks like getting smaller wheels is the way to go. Thanks Mainsail!! I thought about getting a custom riser. The max prefab is 12in right now, I will need about 20 inches. Just concerned that it is too high to create large stress on the bend if trailer jerks? Of...

Thanks HarleyHouse!! That looks great!! Can you still tow up to the 4200lb spec with those tires?

UPDATES So I have had my trailers for 3 months now... Have not done much. Spliced the plug to flat 4 connector, and got lights working in one. 12V bulbs work great. Got my SF97 without any problems. DMV liked it, but they still want to visually inspect the vehicle with VIN confirmation...

Chevimp63, I am still not sure where I went wrong, as I have not tried to splice it after I got back. Since I cut the plug off and exposed all wires, I had to try all combinations but none worked. Assuming my attempts were correct, then downstream I have a continuity problem. My best advice...

Thanks clutzer. Thanks again for everyone's input in my quest to get M1102s from Barstow. Now that this mission is accomplished, I will search for other threads to see what "life after recovery" should be like. Over and out.