Recent content by Steinmeister

I only looked because I remember reading a book about WWII weapons years ago and remember seeing a picture of the Panzer Mk IV with a short 50MM gun. I am in no form a expert on this.

It did have a 50mm early on. http://www.tanks-encyclopedia.com/ww2/nazi_germany/Panzer_IV.php

Oh, I know that faucet....has a long tube that threads up inside the tank, doesn't it?

NDT, that would have definitely made the Texas Report on the nightly news...."Explosion on the 610 loop...overpass destroyed"....glad it didn't!

If it is I am unaware of that. I am picking it up soon. I have the parts to adapt the trailer pulug to a 4 pin trailer plug.

I want to convert a M1102 trailer lights to 12 volt. Is there a 12V bulb that fits the MV single contact 24V light bulbs?

Jtrojan715, the method we used in the Army, and I still use, is to build a 3'x3' sandbox out of 2x4 and plywood, fill it with sand, and set the stove in it. Always gives a nice flat firm surface for the stove and catches any fuel leaks.

Lots of old buses had this engine too. You might go that way.

LMC truck has a repalcement that fits, and can be a CD changer too

I agree with Bob H, if the lower left switch is in "Marker" the amber lights will be on. The green non flashing light on the signal arm means no flasher operation, but does not necessarily mean the flasher is toast. Could be that, to a bad ground anywhere in the system, including the flasher box...

When you drop the rim into the tire/tube/tube sleeve assembly, the lug nut face of the rim should be towards the ground, and the valve stem should be pointing towards the ground. I found that to be easiest, and your valve stem ends up sticking out of one of the rim holes. This is so you can...