Search results

It's the same anywhere. FS 34094 at Home Depot, Lowes, Sherwin Williams, etc. I've bought it at all those with the FS 34094 code. Look here. http://www.steelsoldiers.com/showthread.php?76210-Behr-Paint-Jobs-Show-me-your-MV-s Search feature will find you lots of info on this. Not sure what you...

It sure would be nice to not have to download someones video to watch it.:( And then have to find and delete it.:-(

I think bikeman is doing this now Start with post # 1 http://www.steelsoldiers.com/showthread.php?164561-2017-vin-info-thread&highlight=

Deuce wheel studs Personally, I would not use the Napa studs unless I was broke down somewhere, and needed them now. In the following pic is the stud I removed on left, and Napa stud on right. See where the serrations are. With the Napa ones there's very little serration engagement in the...

Even with anti-drain back valves in the filters? Just asking :-), because I don't know.

Actually, it's 60 ft lbs. Not 75, or 80. Just sayin.:) http://www.steelsoldiers.com/showthread.php?19081-M35a2-Stock-Oil-Filter-Torque-Specs-Needed!

Just so you know, it's WILWOOD, not WILDWOOD

Don't forget #4- booster pump seal.

See posts #1, and #2

Hi Clint, welcome from Florida, USA. Looks like a nice truck to start your project with.

Your in the range of melting aluminum @ 1200 Deg. How accurate is your pyro gauge? Is it digital, or analog. If your gauge is just 2% off, you could have exceeded 1220 deg's, and caused the piston melting.

Because the plastic lens is threaded on the end and screws into the light socket. (That's how it's held on) If you use spacers and move the socket away from the dash, then you need a longer lens to reach the socket.

Brake lines.

I really like that tube straightener. A little pricey though.

Can't control all the nastys with a pressure washer without setting up a containment system.

Ugh. 4 hours, 8 pair of Nitrile gloves 2 cans of brakeClean, 1/2 gallon of parts cleaner later, I have a pretty clean left front brake setup, and drum. Didn't think to take a before pic of that mess. About the most hateful job I've had to do to it yet. Right side just as bad, similar time and...

So is this now on the 2017 agenda, or maybe 2018?:D

From the FL DMV website CLASS E: Any non-commercial motor vehicles with Gross Vehicle Weight Rating (GVWR) less than 26,001 pounds.