Search results

The DUKW tires were 12 ply. Goat tires are 6 ply. There are off road tires that are 1.00 x 18. They are nice and expensive. Just Google the size.

Knowing your pricing that power pack costs more than a Hummer...

N50 is the specked injector.

Sounds like it's working but I'd be a little concerned that the by-pass is still open and, that much, fluid is not circulating through the radiator. In the pic. you can see the second valve for the by-pass.(Little disc on the right) , Also, before you order a rebuild kit, check the block for...

Sure. The special silicone and tubes were for help in preventing erosion at the deck of the aluminum block. The gasket kits come with normal o rings for this purpose. I do not think you'll run it enough to cause erosion if you keep your cooling system clean. Pulling these engines is not a big...

If it's coming out of the airbox drain it means it has bad liner 0 rings. That's the only way water/coolant can be there, unless there is a crack. Up on the deck there are o rings and fire rings. The aluminum block requires silicone inserts and tubes for the water passages. This is not shown or...

Does anyone have the Yanmar L60AE-DE Detailed Service manual in .pdf Thank! Mike

Nice Ride!! You just saved me some fuel. I had a hankerin' to drive my Goat today but watched this video and got my fix for the day. Sounds pretty darn good. It gets better when you add the windshield. Mike

PM me an email and I'll send you the TM9-2320-242-20

The one I uploaded is 500 pages, a little more than PMCS. I just checked it again and it works fine

Doghead, Just downloaded -20. It worked. Look through the different downloads. I uploaded a -20 and it still works. The second "More Gamagoat Manuals" holds the -20

Thanks Charlie 6

What is your fuel pressure? These carbs are very picky about pressure. I Know a guy that thinks he's a mechanic and puts an electric fuel pump on everything. Filled his M37 engine full of fuel. They are designed for about 5lbs. of fuel pressure. More than that will actually open the fuel valve...

Would it be possible to break it up in smaller folders? I don't mean for free. Thanks Charlie 6

Charlie 6, Did you find any more of the old web site. Sure wish I would have saved some of that info!!!!

Sounds real simple but, Check the Battery grounding connection at the frame.

Cool!!

In this picture it's the big pulley with the 1 5/16 nut in the middle, behind the fan, driving the powersteering pump. It's not an easy pull so make the bar long enough and strong enough to take it.

The Civi NHC250 service manual says Barr it over from the accessory drive. Here is what I made at a cost of 0. Works great for doing overhead as well as any job that needs to turn this beast over. The bar is 26" long x 1 1/8 wide x 1/2 thick. Socket is a 1 5/16 cut down so that there is 2...

Nice, Real Nice!!