Search results

Found a piece of optical equipment in Lockbourne, OH that I wanted to get but I wanted to make sure that I could find some one to hire to pick it up and ship it for me before I bid on it. If you live in this area and could pick this up and ship it for me, please PM me. Thanks RK

I know, just gives you some ideas.

I think that sounds like a good idea, my big bar has a set of handle/pin holders on it they are nice for lifting it and moving it around.

I know, couldn't find the right fittings at the store to T it off the top. Planning on adding a valve to it sometime.

Here is a picture of where I tied into the Injector pump.

Sad to hear that people are doing things like that. Can't wait to get out there next week and see all the new stuff thats come in.

Not to hard, if a 16 year old like me can figure it out you should be able to too. I have a winch tower in my truck ,you have to take it off first,there are 2 exterior bolts holding it on and three screws holding it on to the shifting column use a ratchet with a screw driver head to get the...

I have a winch tower in my truck to,you have to take it off first,there are 2 exterior bolts holding it on and three screws holding it on to the shifting column use a ratchet with a screw driver head to get the screws out because there not quite enough room for a screw driver, after removing the...

Got my second fuel line installed today , Makes a huge difference! Idles a lot smother and quieter,and has more power when driving also emits a nice smoke trail:driver:. Hardest part was getting the fuel rail plug out, tried the allen key but it stripped out so I had my uncle weld a nut on and...

Got my second fuel line installed today , Makes a huge difference! Idles a lot smother and quieter,and has more power when driving also emits a nice smoke trail:driver:. Hardest part was getting the fuel rail plug out, tried the allen key but it stripped out so I had my uncle weld a nut on and...

Thats what I was thinking.

Removed the anti tamper ball yesterday to reveal the fuel screw, turned it a half turn, and it sounds a lot more powerful when revving at idle and accelerates a bit faster to. I was wondering what the max number of turns I should back it out would be, to keep it in a safe range for the engine so...

You could use an m927 long wheel base bed bed.

Is that 3rd picture a battery relocation kit? need to get out there and see the new trucks.

Power steering Pump rebuild kit/w filter for NHC250 NAPA FIL 1464

NAPA # for rebuild kit/w filter FIL 1464

The top return line is the only one that's supposed to be held with a hose clamp.

Trucks work grate for pulling boats! here is a picture of the 923 pulling my dads sailboat.

I drive my M923 with out a CDL (registered as a farm truck)but plan on getting one as soon as I can.