• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Maxjeep1

    Truck bought for parts, got it running, but…

    I swear when I started my truck without the turbo I got a huge stream of oil from the big hole. It was like a geyser and it hit the the top of the body. Makes sense that the small hole would be the pressure side and return the large one.
  2. Maxjeep1

    Truck bought for parts, got it running, but…

    They are the bolt holes that hold it to the engine block. I looked at new cartridges and I don’t think they are very expensive
  3. Maxjeep1

    Truck bought for parts, got it running, but…

    The 2 holes in the middle are the oil supply (big) return is smaller. At least that’s how it seemed when I started my truck with the turbo off.
  4. Maxjeep1

    Truck bought for parts, got it running, but…

    It is base fed and you have a supply and return hole and that’s why gasket looks like an 8 Just goes in the base and lubes the bearings and shaft.
  5. Maxjeep1

    Humvee 400 Amp voltage regulator

    Hahaha 🤣 I got it now. I wasn’t thinking about running house off of it and thinking more about it being a better anchor…
  6. Maxjeep1

    Humvee 400 Amp voltage regulator

    I’m confused about 2)? I am in the process of getting rid of my 400amp. I can’t figure out the flood zone part of 2)
  7. Maxjeep1

    M1167 Turret delete plate questions.

    I will in the morning. I don’t think it’s gonna help much and I suspect it’s not even round
  8. Maxjeep1

    Truck bought for parts, got it running, but…

    Open it up and look at it. It’s built to channel water down to the drain at the bottom. My truck has a block off at the bottom and not the duckbill. It’s a major restriction and my truck doesn’t need it. Everyone can do whatever they think is best. This works for me
  9. Maxjeep1

    Truck bought for parts, got it running, but…

    I don’t think that’s even possible? Nothing filters out sand like paper. How come modern vehicles don’t have complete obstructions if it’s a possibility? I think it’s to deflect water and not Dirt
  10. Maxjeep1

    M1167 Turret delete plate questions.

    Thanks. I will probably have my old employer burn me a blank off. I might even weld it in. I have awhile before I get there. Bolt in would be easier.
  11. Maxjeep1

    M1167 Turret delete plate questions.

    Hi-Jacking this thread! What do you need to cover the hole on a M1165 no armor? I have looked around and I don’t know if the ones I find would fit.
  12. Maxjeep1

    Truck bought for parts, got it running, but…

    I never would’ve checked if not for replacing my injection pump. I have had so much help from members here. I never would have had the confidence to do it without them. I don’t know anything about diesels or Humvee’s. The TM’s are really helpful but nothing like being able to ask a question.
  13. Maxjeep1

    Truck bought for parts, got it running, but…

    I had the air canister off when I did the injection pump and the elbow that you can’t see was torn apart. Might be a good thing to check because rain water would’ve run into it. I really like my air canister now. I took that inner part out to give it more airflow.
  14. Maxjeep1

    Truck bought for parts, got it running, but…

    I got this one. I also did the Mogman wastegate upgrade
  15. Maxjeep1

    Truck bought for parts, got it running, but…

    I don’t think you should have oil coming from there. I would think that it’s getting past the turbo. When I replaced my injection pump I took everything off to get better access. Mine looked bad on the outside but clean and new on the inside. I cleaned everything up before I put it back...
  16. Maxjeep1

    Truck bought for parts, got it running, but…

    It just looks like it might be leaking from the picture, hard to tell from the picture. I took mine apart and I have never done it before. I put a reference line on it before I separated it. The one bolt will not come out unless you spin it. I cleaned it up and checked the play and I put a...
  17. Maxjeep1

    Truck bought for parts, got it running, but…

    Dye would really help you. Might have a turbo base gasket leak. Maybe pull the turbo off and see if it has oil in it. Shouldn’t. I took mine apart on my non runner and it was clean and shaft was tight.
  18. Maxjeep1

    Truck bought for parts, got it running, but…

    I would clean it and put dye in the engine oil. My M1165 was described as visible blow by. I had fuel in my oil from fuel pump failure and truck had 83 miles since returned to A condition. I changed the oil and let it run and the vapor that was visible was gone. I installed the CDR valve...
  19. Maxjeep1

    Tire talk

    I’m a big fan of the Toyo MT. I have the 38/15/20 on my H2 and they ride and wear great… I think that’s the best big tire made and they come in 40”. If I was going away from the 16.5 wheel I would buy the Toyo’s for my M1165
  20. Maxjeep1

    camping tent in bed? Two man configuration

    Don’t you have big bears that have been known to eat a person or two? I have never been a fan of up armor until now. Lol I guess dogs would give you a little warning.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks