Search results

+1 on what Kurt reports. I find the sound from the 1030 to be less noticeable in the house. The 802 has a lower frequency sound that goes through walls better where the 1030 has a higher frequency sound (due to the 3 cylinders vs 2) and that shift is just enough to make it less noticeable when...

The old girl could use a new set. :) Batteries.. We talkin batteries here.

55 gallon drums here. Biocide treated in the drums and a little ATF or BioDiesel added when used in the equipment. Use off road stuff so I don't rotate it through the on-road vehicles. Got tractors and an excavator in addition to generators that keep the fuel moving.

Here is ours. Feel free to share your parade photos!

Wetstacking is a thing but it doesn't happen in 5 minutes. It takes tens of hours of running with zero load to be a problem. As you bring on some load the time it takes to become a problem gets longer and longer. If your water heater cycles a couple times a day wetstacking may NEVER be a...

I expect they are bonded in the main panel. Depending on the panel design there is a bonding screw that would be put in the neutral bar that will connect it to the frame of the panel. You won't necessarily see a jumper between the neutral and the ground buss bars.

Where is the ground rod connected? The main panel? Edit - How do you know your ground and neutral isn't connected in the main panel?

Its a balance between velocity/temperature and back-pressure. A couple of items not mentioned here is you want the exhaust line to slope AWAY from the generator. You will want well insulate the piping to keep condensation to a minimum. If you go through the roof, you will want to set a TEE in...

Oh, the other thing is its out of sight when its being stored. Buying the cable and connectors was like $500. I'd be nervous to put it on a reel out in the open.

I think its a lucky fluke. I bought a generator recently that included load cabling would never fit in one of those boxes! Maybe 25' would but not much more. I'll have to snap a photo of that cable next time I'm over there.

I have 100' of SOOW 6/4 cable that I layer into one of the tool boxes on the trailer. It fits perfectly. I weave it so I can pull the generator end out and connect it without removing the entire string of cable. That allows me to pay out as much of the load end cable as I need to make the...

I've been trying to get one of those for less than a fortune for a very long time.

I’ve been on the lookout for a 420 or 430 loader for my old JD reactor.

This. 100%

Go slow and make sure you don't have other problems. When you get known good batteries in there see if it will bump over with the dead crank switch. Before doing that see if you can spin the engine over by hand.

OK. High probability the computer has a problem. They use a big jump box to try and start the units. Since they couldn't get the hours off the screen it means the display didn't light up when they tried to jump it.

I assume you recently picked it up from Butner? Is it this one? https://www.govplanet.com/for-sale/Generators-and-Power-Equipment-2014-Cummins-Power-Generation-MEP-1040-Generator-Set-North-Carolina/10499863?h=5000%2Csm%7C1%2Ck%7Cmep1040%2Csort%7Cd+asc%2Cmf%7C1&rr=0.5&hitprm=&pnLink=yes

Sounds like it’s going to require the DCS to be removed and inspected internally for damage.

Here in NC when you go to complete the purchase you now have the option for the SF97 or a NCDMV Title. If I remember correctly having them provide the title is like $200 over the cost of the SF97. If I take the SF97 and get it myself its $25. There are road use tax on top of that which you have...

I was going to ask that, as cheap as buck converters are, can you use one of those?