Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Im looking for a picture in the TM 9-8031-2. I was told it was 186 on page 329. It is a breakdown of the drivers seat and how it is assembled. I did look in the m37 TM's and did not see 9-8031-2. If possible please email it to me or shoot me in the correct direction. Thank you
I thought 12 volt would be a little more simple. Im not going to change all that stuff. Is there way to make sure those parts are in decent cond.It does run very well.
I would really like to swap my truck to 12 volt. What would i have to change and is it worth it.this m37 was a fire truck for a long time and is all original military wires and everything.
It turned out i had a bad rectifier. The guy at another parts store where i work does work on them (Napa). He put in a new rectifier and she charges fine. Thanks for the help
Im sorry for sometimes forgetting to use the correct punctuation and to capitalize my words when needed. I do not have allot of schooling going for me. It is not done on purpose. Ignorence is no excuse i know.I will honestly try harder to follow the rules. I have read what i beleive to be...
it was not putting out (not charging) this all started in my other post i have on this forum. i hooked up a 12 electric pump to run a plow. i hooked to the first battery and thought where it was mounted would be ok. when i pushed the button for the pump it stopped charging. i have only one wire...
there is a gentalman at our work that does all our electric work on all types of construction equiptment. he tested my #1 alt and said it needed a regulator and brushes. i bought them and it still does not test good. we have a starter-altinator tester that spins them up.he then tested all the...
sorry so long getting back to you. i havent had the time to pull all the wires and check to make sure they are all clean. i also can need alt 1 tested. it was 18 below this morning when i left for work this morning. supposed to warm up mid week. i will see if it does. i have been charging...
I only have the one cable going to the battery up front. the rest is self contained in the electric pump. now my volt meter reads right on the green yellow line. i disconnected both battery's and fully charged them. the same thing right on the line. dont know what i could have done to mess it...
i have a electric pump i hooked up to supply fluid to the valve control of a fisher plow. this is a low budget hookup but every thing works good.i use this for my own drive way. i have the power cable to the battery close to the radiator. would i be better off to put it on the battery close to...
can i grab 12 volts off one battery to run a electric plow pump.i only have my driveway that i plow and don't really have the time to hook up a belt driven one right now.
some times an engine will what they call wet stack. that means the valve in that cylinder may have issues letting unburned fuel push out the exhaust valve i have seen this on a bigger engines. im just throwing this out because there i have seen it, that dont meen thats your problem
Here is my m37 coming off louds island in maine going on the barge i had to hire to bring it to the small port i picked it up at. the vin is 80263068. The reason i ask for help with the vin is, one old registration says 1954 and he sold it to me as a 1957 or 8. Not a big deal to me i am...