Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
The tires and rims should fit !! The axles are basicallt the except for the air brakes versus the Hdryaulic brakes !! Yes I think the axles are swappable but the rework need to make the air system work for the braker would be very difficult to rework . Your idea is good but it wouyld just be...
The M809 series air cleaner assembly could be adapted to fit a M39 series it would not be that difficult to do !! As for your photo that is a M39 series air cleaner assembly. as for your filter element i bet you can be cleaner if you find a local filter cleaner that cleans air filters.
the M393 Series all use the wedge style air brakes on them the older m35 and M809 trucks are air over Hydraulic .. Also with the M939 series truck you will have to get a CDL with air brake endorsement.
I would not consider pulling a M923 with the lighter M931 it could lead to BIG problems if you do not hook up the air lines from truck to truck . Trying to slow down or when stopping especially if it is an emergency without the air lines could get scarey !! Now on the other hand pulling the M931...
Yes you can chan ge the cab the truck VIN is stamped into the frame on the left front rail and to change the cab all you have to do is remove your original data plate and reinstall it to tye new cab because they are riveted on the dash of the cab as long as your data plate matches the frame...
Ok guys I need to know if any of the Oklahoma Convoy SS member would like to dress up and join in on the Fun and be in the Ghouls Gone Wild Parade it will be held the evening of Saturday October 27th ?? I need to know so I can get the Parade application and entry fee in by Oct 1st with the...
Yes I agree !! if you are interested there is the Ghouls Gone Wild Parade in late October !! The only bad thing is there cannot be anyone under 18 in the Parade .But it is a blast to be in !! I was in the Parade 2010 and it was lots of Fun !!!
Any Commeridal diesel Engine will fit, because the Bell housings are SAE standard and will bolt up to the trans !! Along with the bell housings the transmissions in commerical are SAE standard and you can also swap the trans as Well !!
Darn Clepto !! I had one and would have let you have it cheap !! If you want another one you are welcomed to it !! I do not think I will get my project done that I was going to use it for !!
If you are interested in keeping the military look for your truck ?? Consider getting the AB-15 antenna base and use one each sections MS-118, MS-117, and MS-116 antenna setions. Trim the tip of the MS-116 section to get an overall length of 110 inches to include the the antenna base and that...
I would bet you can get away with just the outer element !! With the use you are going to use it for and it would also allow the engine to breath easier with the single element !! I am sure you could find a single element to fit that has a smaller micron size as a replacement filter . Another...
I have installed the same setup on my M813 5 Ton and it works well !! I am using a Cobra DX-19 in my truck and I like the setup alot . I have thought to put my MX-3019 antenna set on the truck as a second dummy antenna for the looks ..
Also check and drain if needed , the brake fluid as well if your air pak was under water !! Did you put the plug into the bell housing efore driving into the water and hook up the vent line to the master cylinder vent ?? That could of helped to prevent any water getting ito your different...
Hey al you OKC SS Members the Ghouls Gone Wild Parade is comming up in late October. I am just tryng to get an Idea if anyone wants to joinin this year ?? I,ll get the forms anyone would like to join ?? I did the Parade in Oct 2010 and had a Blast !! Let see who is interested !! Lets put onyour...